Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Fort Worth?
A tub-to-shower conversion in Fort Worth typically costs between $3,500 and $10,000, with most homeowners landing in the $5,500 to $8,000 range for a standard 60-inch alcove conversion using mid-grade materials. The final price depends on the size of your existing tub footprint, what’s hiding behind the walls once demo starts, and whether you’re changing plumbing locations. A basic acrylic or fiberglass replacement shower can run $3,500 to $5,500; a tiled shower with a custom glass door and upgraded fixtures pushes $7,000 to $10,000.
Those numbers cover a licensed contractor doing the work in Fort Worth, not a DIY job or a handyman operating on the side. Here at Sawyer Remodel Fort Worth, we put the full price in writing before we touch a single tool, so you’ll know exactly what you’re paying before demo day.
Key Takeaways
- Typical range: $3,500 to $10,000, with $5,500 to $8,000 covering most standard jobs
- Biggest cost drivers: tile vs. acrylic, plumbing changes, glass door style, waterproofing method
- Timeline: 3 to 7 days for most conversions; 1 to 2 weeks if you’re moving drain locations
- Permits: Often required in Fort Worth when plumbing moves; we handle the paperwork
- ROI: Strong for resale and aging-in-place value; many Fort Worth homes built pre-1990 still have original tubs
Tub-to-Shower Conversion Cost Breakdown (2026)
Here’s what a typical tub-to-shower conversion in Fort Worth costs line by line, based on what we see across jobs in Arlington Heights, Wedgwood, Fairmount, TCU-area homes, and North Fort Worth neighborhoods like Saginaw and Keller.
| Line Item | Low Range | High Range | Notes |
|---|---|---|---|
| Demolition & disposal of existing tub | $400 | $900 | Cast iron tubs cost more to remove than fiberglass |
| Shower pan (acrylic/fiberglass base) | $500 | $1,200 | Tile-ready pans with waterproofing run higher |
| Wall surround (acrylic or fiberglass) | $800 | $2,200 | Three-piece surrounds are cheapest; seamless panels cost more |
| Tile walls (ceramic or porcelain) | $1,500 | $4,000 | Includes thinset, grout, and labor; pattern and tile size affect price |
| Waterproofing system | $300 | $1,000 | Schluter or RedGard membrane; we include this on every tile job |
| Glass shower door | $600 | $2,500 | Frameless costs more; semi-frameless is the mid-range sweet spot |
| Plumbing modifications (valve, drain, supply lines) | $300 | $1,800 | Moving the drain from tub position adds the most cost |
| Fixtures (showerhead, valve, trim) | $250 | $1,500 | Kohler and Moen are our standard lines; Grohe for premium |
| Permit fees (Fort Worth) | $75 | $350 | Varies by scope; we file for you |
| Labor (installation crew) | $1,200 | $4,000 | 2-3 days for simple jobs; 5-7 days for full tile work |
What moves the needle most? Two things. First, whether you choose an acrylic surround or actual tile. Tile adds $1,500 to $4,000 over acrylic, and for good reason: it’s fully customizable, it reads higher-end, and when installed over a proper waterproofing membrane it handles North Texas humidity without complaint. Second, whether you keep the existing drain location. On the older pier-and-beam homes you’ll find throughout Ridglea, Mistletoe Heights, and the Historic Southside, moving a drain often means working beneath the subfloor, which adds hours and dollars.
What Affects Tub-to-Shower Conversion Pricing in Fort Worth
This is where honest contractors and cheap ones part ways. A quote of $3,200 from one company and $7,800 from another can both be legitimate. Here’s what separates them.
- Drain relocation. Standard tubs drain at one end; showers drain in the center. If your drain can stay put and you choose an offset pan, you’ll save $500 to $1,200. Move it and you’re adding a plumber and another day of labor.
- Wall condition after demo. Fort Worth homes built before the 1990s often have water damage hiding behind the tub surround, especially around the valve wall. We budget for new backer board on every job, but if studs or subfloor are rotted, that’s additional work you can’t see until the old tub is out. A written price from us includes what we can see; if demo uncovers a problem, you get a photo and a number to approve before we go further. No surprises, no invoice shock.
- Shower door choice. Frameless glass adds $800 to $1,500 over a curtain or semi-frameless door. It’s the single biggest aesthetic upgrade and also the easiest place to trim budget without sacrificing function.
- Access to the bathroom. Narrow doorways, second-floor bathrooms, and older Fort Worth bungalows with tight hallways can make demo and material handling slower. It’s not usually a huge number, but it’s there.
- Finish level of fixtures. A Moen single-handle valve and basic showerhead runs $250 to $500. A Kohler thermostatic valve with a rain head and handheld sprayer pushes $1,200 to $1,500. Both are good; one is noticeably nicer.
- Waterproofing method. Acrylic surrounds are themselves waterproof; tile jobs need a membrane behind the tile. We use Schluter Kerdi board or a rolled-on RedGard system on every tiled shower, and that material cost is in the line item above. Some cheaper bids skip this step, and that’s a shower that fails inside of three years. In a Fort Worth house with drywall behind tile, you’ll see it as grout cracks and eventually a soft wall.
How to Save on Tub-to-Shower Conversion
You can cut the bill without cutting corners. Here’s what actually moves the number down, based on jobs we’ve quoted across Tarrant County.
- Keep the drain where it is. Use a shower pan designed for the existing tub drain location. This is the single largest saver, $500 to $1,200.
- Choose acrylic over tile. A quality acrylic wall surround is $1,500 to $4,000 cheaper than tile and zero maintenance for a decade or more. If you’re converting a guest bathroom, this is the call.
- Use a curtain rod instead of a glass door. Save $600 to $2,500. You can always add the glass door later; the shower opening doesn’t change.
- Stick with stock sizes and finishes. Custom tile patterns, niche layouts, and specialty trims add labor hours. A 4×12 white subway tile with a standard Schluter edge trim (the metal strip that waterproofs where your tile meets the wall or floor) is a classic look that costs far less than a diagonal mosaic with a custom border.
- Replace fixtures, but don’t relocate them. A new valve and showerhead at the existing stub-out keeps the plumber’s time under two hours.
- Schedule for the shoulder season. Summer is peak remodel time in Fort Worth. Booking in November through February, when the heat’s off and crews aren’t stretched thin across multiple job sites, can sometimes mean a faster start date and more flexible scheduling, though our pricing stays the same year-round.
We offer free estimates on every tub-to-shower conversion in Fort Worth. You’ll get a written price, a scope of work, and a start date, before you commit to anything. Call (682) 841-6652 and we’ll put it together.
What’s Included in a Sawyer Remodel Fort Worth Tub-to-Shower Conversion
Every tub-to-shower conversion we do in Fort Worth follows the same playbook, and it’s all documented under The Relay Standard: a live arrival time so you’re not burning a day off work waiting for a contractor, photo updates before and after the work, and a written price before anything gets touched. The invoice you pay at the end is the price you approved at the start.
Here’s what a typical job includes:
- Full demo and haul-away of your existing tub, surround, and valve
- Inspection of the wall cavity and subfloor after demo, with photos sent to you
- Replacement of any water-damaged drywall or backer board (visible damage is priced upfront; newly uncovered damage gets documented and approved before we proceed)
- New shower pan and wall surround or tiled walls over a full waterproofing membrane
- New shower valve, trim, and showerhead, typically from Kohler or Moen
- Shower door or curtain setup per your choice
- Caulking, sealing, and cleanup with all debris hauled off-site
- A 365-Day Done Right Promise in writing: if it’s not done right, we make it right, for a full year after the job closes
Your crew is background-checked and wears a Sawyer Remodel uniform, so you’ll know exactly who’s walking through your door before they arrive. If something ever fails within that first year, the second visit is free. No argument, no chasing us down.
Tub-to-Shower Conversion vs. Bathroom Remodel: What’s the Difference?
A tub-to-shower conversion is a focused project: remove the tub, install a shower in the same footprint. A full bathroom remodel in Fort Worth usually means moving walls, replacing vanities, changing flooring, and reconfiguring the whole space, which runs $9,000 to $28,000 depending on scope. If your bathroom is otherwise in good shape and you just want the tub gone, a conversion is the right-sized project. If the floor is dated, the vanity is coming apart, and the lighting belongs in a 1980s rental, a full remodel might be the better call, and we’ll tell you honestly which one we’d pick for our own house.
The good news: a tub-to-shower conversion preserves most of your existing plumbing, so it’s far cheaper per square foot than building a new bathroom or moving a shower to a different wall.
Fort Worth-Specific Considerations
Fort Worth homes have a few quirks that affect tub-to-shower pricing more than homeowners expect.
Foundation movement. North Texas clay soil expands and contracts dramatically. Homes on slab foundations throughout Fort Worth, especially in neighborhoods like Wedgwood, Meadowbrook, and Riverside, can develop hairline movement that affects tile and grout over time. That’s one reason we recommend a flexible waterproofing membrane and, on pier-and-beam homes, checking the subfloor for level before setting a pre-sloped pan. It’s not a dealbreaker, but it’s something a Fort Worth contractor should be accounting for, and it’s one of the first things we check on site.
Hard water. Fort Worth’s water supply is moderately hard, which over time produces mineral scaling on shower glass and tile. We recommend a good water-resistant sealant on grout lines and angled splash guards where possible. If you’re choosing between a dark tile and a light tile, light colors hide hard-water spotting better than dark ones. Small thing, big difference in a house with Fort Worth water.
Cast iron tubs in older homes. The pre-1980 bungalows in Fairmount, Ryan Place, and Arlington Heights frequently have cast iron tubs, which are heavy and labor-intensive to remove. Budget an extra $200 to $400 for a cast iron demo versus a fiberglass or acrylic tub. If your tub is cast iron and in good shape, we can sometimes have it hauled away for scrap value, which offsets part of the demo cost.
FAQs – Tub-to-Shower Conversion Cost in Fort Worth
How much does a tub-to-shower conversion cost in Fort Worth?
A tub-to-shower conversion in Fort Worth runs $3,500 to $10,000, with most standard conversions landing between $5,500 and $8,000. Acrylic surrounds with a shower pan and semi-frameless door sit at the lower end; tiled showers with frameless glass and upgraded fixtures hit the upper end. Call (682) 841-6652 for a written, no-pressure quote on your specific bathroom.
Is it cheaper to repair a tub or convert it to a shower?
For a tub with bad tile, a failing surround, or a worn-out valve, repair often runs $1,200 to $3,500, while a full conversion runs $3,500 to $10,000. But if the tub surround is leaking or the tub itself is cracked, repair is throwing money at a problem that’ll return. We’ll give you a straight answer on which path makes sense for your bathroom, and either quote you get is free.
How long does a tub-to-shower conversion take in Fort Worth?
Most tub-to-shower conversions take 3 to 7 working days from demo to final caulk. Acrylic surround jobs run 3 to 4 days; tiled showers run 5 to 7 days to allow for tile setting and grout curing. The shower is usable about 24 hours after the final sealant work. We schedule the full project upfront so you know exactly which days we’ll be in your home before we start.
Do I need a permit for a tub-to-shower conversion in Fort Worth?
In most cases, yes. The City of Fort Worth requires a plumbing permit when a shower valve or drain is being replaced or relocated. Permit fees typically run $75 to $350 depending on the scope. We pull all required permits and schedule inspections as part of the job, and the permit cost is included in your written price. You’ll never be asked to chase down city paperwork yourself.
Will a tub-to-shower conversion increase my Fort Worth home value?
In most cases, yes. Fort Worth buyers, especially younger ones, consistently rank a walk-in shower above a tub-only bathroom, and converting the master bath tub to a shower typically recovers most of its cost at resale. If your home has only one bathroom, we usually recommend keeping at least one tub, because families with young kids want one. For a master bath conversion on a home with a second tub elsewhere, the value math works.
Can you do a tub-to-shower conversion for a senior or person with limited mobility?
Yes. Low-threshold and no-threshold shower pans, grab bars rated for 500 pounds, built-in seating, and handheld showerheads are all standard options we quote regularly for aging-in-place conversions in Fort Worth. These additions typically add $800 to $2,500 to the total job, depending on the specifics. If you’re converting for accessibility, we’ll make sure the finished shower meets ADA-compliant dimensions and that every fixture is placed where you actually need it.
Ready to Get a Written Price?
If you’re thinking about a tub-to-shower conversion in Fort Worth, you don’t have to guess what it’ll cost. Call (682) 841-6652 and we’ll come out, look at your bathroom, and hand you a written price before any work starts. That’s how we’ve operated since Luca Romano founded Sawyer Remodel Fort Worth as part of the Relay Home Co. family in 2005, and it’s the only way we know how to work.
You’ll get a real number, a real start date, and a real person answering the phone when you call. No voicemail loops, no four-hour windows, no surprises on the invoice. That’s the whole deal.
Pricing reflects the Fort Worth market as of 2026. Sawyer Remodel Fort Worth offers free estimates – call (682) 841-6652.
Written by Luca Romano, Owner at Sawyer Remodel Fort Worth, serving Fort Worth since 2005.
What Our Customers Say
"Solid job. A few punch list items took a week, but they were done."
- Ike F."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K."Bathroom remodel. Tile and shower niche are flawless. Updates by text kept me in the loop."
- Hugh P.
