Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Fort Worth Owner’s Guide
If you’re planning a home addition or ADU in Fort Worth and want KraftMaid cabinetry built into it, expect to budget $45,000 to $130,000 for the full project, with cabinet work typically adding $4,000 to $13,000 on top of framing, electrical, plumbing, and finishes. We stock and install KraftMaid and KraftMaid-compatible cabinet lines in Fort Worth, and we match existing KraftMaid door styles when owners want a new addition to feel like part of the original house. Most people call us after they’ve pulled out a drawer in their existing KraftMaid kitchen and found a cracked face frame, or after a contractor quoted them builder-grade boxes when they specifically asked for KraftMaid quality in the new square footage.
Here’s what owners tell us: they notice a cabinet face pulling away from the box, a soft-close hinge that slams instead of catching, or a drawer glide that grinds every time they open it. Sometimes it’s a door that’s warped from the humidity swings we get in Fort Worth between dry summers and wet springs. Whatever the symptom, we can source the correct KraftMaid part or build matching cabinetry so the new addition looks like it was always there. Call (682) 841-6652 and tell us your cabinet style name or finish code, and we’ll tell you whether we can match it.
Which KraftMaid Models This Applies To
KraftMaid builds cabinetry across several lines, and the part you need depends on which line your original cabinets came from. We work with the full range: the entry-level KraftMaid Core line, the mid-tier KraftMaid Vantage line with its wider style selection, and the upper-end KraftMaid Signature line that offers framed and frameless construction, deeper drawers, and heavier-duty hardware. If you have a sticker inside a drawer or on the back of a drawer box, it usually carries the cabinet style name, the finish code, and sometimes the date of manufacture. That sticker is the fastest way for us to match a replacement part or a new run of boxes for your addition.
One compatibility gotcha Fort Worth owners hit often: KraftMaid has shifted drawer glide hardware between generations over the years. A cabinet from 2012 and a cabinet from 2022 may both be labeled “KraftMaid Vantage,” but the undermount glides are different widths and the mounting clips don’t interchange. We measure the glide width and the drawer box thickness before ordering anything, because ordering the wrong glide set costs you a week and a restock fee. For the panels themselves, KraftMaid offers both full-overlay and standard-overlay door styles, and the reveal gaps are not the same. If you want new KraftMaid cabinets in your ADU to visually match older KraftMaid cabinets in your main house, we check the overlay spec before we quote, not after.
We are an independent service provider and not affiliated with KraftMaid. What that means for you: we can recommend a KraftMaid-approved part when it matters, and we can also point you to a quality aftermarket equivalent when the OEM price doesn’t justify itself. For hinges and drawer glides, aftermarket from Blum or Salice often exceeds the original spec for less money. For door and drawer fronts, we order genuine KraftMaid to keep the finish consistent, because aftermarket color matching on stained or painted finishes is a coin flip. We carry KraftMaid matching hardware on the truck for the most common Fort Worth cabinet styles, and we can order the rest within days.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
- Drawer face separating from the drawer box. KraftMaid attaches drawer fronts to boxes with adhesive and mechanical fasteners, and when Fort Worth’s heat bakes a cabinet near a window or a south-facing wall, the adhesive gives up first. You’ll see a hairline gap at the top edge of the front panel. It starts cosmetic but worsens until the front separates completely.
- Soft-close hinge slams or won’t stay closed. KraftMaid’s soft-close mechanisms are small hydraulic pistons inside the hinge cup. When they fail, the door bounces back instead of holding. This is the single most common KraftMaid call we get in Fort Worth, because the pistons wear out around the eight-to-ten-year mark regardless of cabinet line.
- Drawer glide grinds, sticks, or drops. Undermount glides rely on small ball bearings in nylon carriers. Dust from Fort Worth construction, pet hair, and years of use wear the carriers down. The drawer starts cocking to one side and eventually falls off the glide track entirely. If you catch the grinding early, it’s usually a $40 to $80 glide replacement instead of a full drawer rebuild.
- Door panel warped or showing finish cracks. KraftMaid doors are solid wood or MDF with a wood veneer depending on the style. Fort Worth’s humidity swings between 20% in late summer and 90% during spring storm season cause wood to expand and contract repeatedly. Painted MDF doors hold up better; solid wood doors show hairline cracks at the joints after enough cycles.
- Face frame pulling away from the cabinet box. On framed KraftMaid cabinets, the face frame is glued and stapled to the box. When the frame separates, you’ll see daylight or a gap at the seam. This usually happens when a cabinet was installed tight against a wall that shifted, or when a heavy countertop was set without adequate support underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a full home addition with KraftMaid cabinetry runs $45,000 to $130,000 depending on square footage, foundation work, roofline complexity, and finish level. ADU construction runs higher, from $90,000 to $220,000, because you’re adding a second kitchen, a second bath, and separate utility connections. If the scope is just KraftMaid cabinet work inside a new or existing space, budget $4,000 to $13,000 for cabinet installation, $2,000 to $6,500 for countertops, and $800 to $2,500 for the backsplash. A kitchen island alone runs $3,000 to $10,000 with cabinets, counter, and plumbing if you’re adding a sink.
What’s included when we do the work: a written line-item quote before any tool gets picked up, exact KraftMaid or approved-aftermarket part numbers on that quote, and a fixed price that doesn’t change at the door. The 365-Day Done Right Promise covers our installation work for a full year. If a drawer front we installed separates, a hinge we mounted fails, or a cabinet we hung pulls from the wall, we come back and fix it. Every part we supply carries its manufacturer warranty, and our labor carries our written guarantee. You’ll know the price before we start, and the invoice matches the quote.
DIY or Call Us?
Cabinet work on a home addition or ADU is not dangerous the way a garage door spring is dangerous, so here’s the straight answer: if the problem is a single hinge or drawer glide, a homeowner with basic tools can usually swap it in 20 minutes once the correct part is in hand. The tricky part is identifying the correct part. KraftMaid has used at least four different hinge mounting patterns across its lines, and a mismatched hinge will leave your door crooked no matter how carefully you install it. That’s the moment a $12 “quick fix” becomes a second trip, a second part, and a door you still can’t close.
If the issue is a separated face frame, a warped door panel, or matching KraftMaid cabinets from an addition to what’s already in your main house, call us. Matching a finish and overlay spec across a room takes measuring, a finish code, and usually an order from KraftMaid that a big-box store won’t place unless you bought the original cabinets from them. We’re already doing this work across Fort Worth, from Arlington Heights to the Cultural District, and we’re glad to take a look. Call (682) 841-6652 and we’ll talk through what you’re seeing. Estimate’s free.
FAQs
With normal use, KraftMaid cabinets last 20 to 30 years in Fort Worth, but the soft-close hinge pistons and drawer glide bearings typically wear out around year 8 to 10. The cabinet boxes and door fronts hold up far longer than the moving hardware, so a mid-life hardware refresh of $200 to $600 is often smarter than replacing everything. Call (682) 841-6652 if you want us to assess your specific cabinets.
Yes. We repair separated face frames, replace worn hinges and glides, re-secure drawer fronts, and swap out damaged door panels. If the cabinet box itself is structurally sound, repair is almost always cheaper than replacement. If the box is water-damaged or pulled from the wall, replacement is the honest recommendation. Call (682) 841-6652 and we’ll tell you which one you’ve got.
Hinge and glide replacements are done in one visit, usually under an hour. A door or drawer front replacement takes one to three weeks once we’ve matched your KraftMaid finish and style code. A full cabinet install inside a new Fort Worth addition is part of the larger project timeline, not a standalone visit. We’ll give you a written schedule before work starts so you know exactly when each phase finishes.
We stock the most common KraftMaid hinge, glide, and drawer front sizes on our trucks. The long-tail items, like a specific door style in a specific stain or paint, are ordered direct from KraftMaid and arrive in one to three weeks. If we don’t have your part on the truck, we’ll tell you that before we come out, not after.
If you’re planning a Fort Worth home addition or ADU with KraftMaid cabinetry, or you have a KraftMaid part that’s failing and you want it fixed right, call (682) 841-6652 for a free estimate. Luca Romano still does the walkthroughs himself, because he’s seen too many additions go sideways when the owner stops showing up. The work talks. We just back it up.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
