







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Fort Worth Owner’s Guide
Wellborn bathroom remodeling in Fort Worth typically runs $9,000 to $28,000 installed, depending on cabinet configuration, countertop material, and how much plumbing moves. We stock Wellborn-compatible cabinet parts, drawer slides, hinges, and replacement doors on our trucks, and we can usually match your existing finish the same week. Most Fort Worth homeowners call us after a drawer front splits along the grain, a soft-close hinge gives out, or a vanity cabinet swells from years of shower humidity. You notice it first as a sticky drawer or a door that won’t sit flush, then you realize the box itself is starting to separate at the corner joints. That’s the moment to stop forcing it and call someone who works with Wellborn cabinetry every week.
Which Wellborn Models This Applies To

Wellborn builds several cabinet lines, and the hardware and door profiles vary between them. The full-overlay Premier line uses different hinge plates than the standard-overlay Estate series, and you can’t swap one for the other without the door sitting proud or recessed. Here’s the compatibility gotcha we see constantly in Fort Worth: Wellborn changed their hinge boring pattern around 2015, so a hinge from a 2012 Premier door won’t mount cleanly on a 2018 replacement door, even if both say “Wellborn” on the packaging. The mounting screws land about 3mm off, and that 3mm turns into a door that rubs the frame or gaps at the top.
To identify what you have, pull a drawer and look for the stamp on the inside of the drawer box. Wellborn stamps their cabinet boxes with a series code, typically three or four letters, and that code is the fastest way for us to pull the right door profile and finish. For anything made after 2015, the stamp usually lives on the back of the face frame near the top hinge. For older cabinets, check the underside of the bottom shelf. When the stamp is worn off, we match by measuring the reveal width and the hinge cup diameter, which are the two dimensions aftermarket parts get wrong most often. On the OEM-versus-aftermarket question: Wellborn hinges are genuinely better than generic knockoffs because the spring rate on the soft-close mechanism is tuned to the weight of a Wellborn door, not a generic one. We keep both on hand and quote both prices so you decide, but for a daily-use vanity door we point people to Wellborn’s OEM hinges every time.
Styles & brands we work with







Signs Your Wellborn Bathroom Remodeling Is Failing
- Drawer fronts separating at the miter joint. Bathroom humidity cycles in Fort Worth, especially in summer, swell and contract the wood. Once the miter opens even a hair, water gets in and the joint fails fast. You’ll see a hairline crack at the top corner of the drawer face.
- Soft-close hinge slamming or not catching. The hydraulic mechanism inside the hinge wears out after roughly 10 to 15 years of daily use. When it stops catching, the door bangs shut, which then stresses the hinge plate screws and loosens them from the face frame.
- Swollen cabinet box corners near the floor. This is the classic Fort Worth problem. Slab foundations shift, the cabinet sits slightly out of level, and any splash that hits the toe kick wicks up into the side panel. Wellborn boxes are particleboard core with a laminate face, and once particleboard swells it never shrinks back.
- Drawer slides grinding or popping. Ball-bearing slides fail from humidity plus dust. The bearings pit, then the slide catches mid-travel. Forcing it bends the rail, and then the drawer sits crooked and rubs the face frame.
- Finish peeling on door edges near the shower. Wellborn’s catalyzed finish holds up well, but constant steam from a poorly vented Fort Worth bathroom will eventually lift it at the bottom edge of the door. Once it starts peeling it spreads, because moisture gets under the finish layer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Wellborn bathroom remodel in Fort Worth lands between $9,000 and $28,000. That range covers everything from a single vanity replacement with prefab quartz in the $9,000 to $14,000 zone, up to a full gut with custom Wellborn cabinetry, new tile, plumbing moves, and lighting in the $18,000 to $28,000 zone. Here’s the line-item breakdown so you know what you’re paying for:
- Wellborn vanity or linen cabinet, installed: $800 to $3,000 depending on width and series
- Countertop with undermount sink cutout: $2,000 to $6,500
- Plumbing rough-in changes (moving supply lines or drain): $1,500 to $4,000
- Tub-to-shower conversion: $3,500 to $10,000
- Full bathroom remodel, all trades: $9,000 to $28,000
Every quote we write in Fort Worth includes the parts, labor, haul-off, and the written warranty in one number. No allowances, no “plus materials” surprises. The price Luca approves is the price on the invoice. If a Wellborn part we install fails within the year, we come back and swap it under the 365-Day Done Right Promise, no argument.
DIY or Call Us?
For Wellborn parts specifically, there’s a safe middle ground between full DIY and calling us out. You can replace a drawer slide or a hinge yourself if you have the exact Wellborn part number, a #2 Phillips, and the patience to work inside a cabinet box. The place DIY goes wrong is matching the finish. Wellborn has run dozens of finish codes over the years, and a “white” from 2010 is not the same white as 2023. That’s where most Fort Worth homeowners end up wasting $75 on a door that doesn’t match the vanity next to it. The dangerous part isn’t the cabinet, it’s the plumbing: moving a drain line or touching supply valves inside the wall means water, and water mistakes in a Fort Worth slab home get expensive fast. If the job involves anything behind drywall, call us at (682) 841-6652 and let Luca walk it with you. If it’s a hinge swap and you have the part, go for it.
FAQs

Wellborn cabinets in a Fort Worth bathroom last 20 to 30 years if the bathroom is properly vented, and closer to 10 to 15 if it’s not. Humidity is the variable. The boxes and doors hold up, but hinges and drawer slides are wear items that typically need replacement once in that lifespan. Call (682) 841-6652 if you want us to assess what’s worth saving.
Yes, in most cases a damaged Wellborn cabinet can be repaired, but not when the box itself is swollen. Split door panels, worn hinges, and drawer slides are straightforward repairs. A particleboard box with water damage is done, because the structural integrity is gone and you’d be paying us to prop up a dying cabinet. Call (682) 841-6652 and Luca can tell you which category yours falls into.
A vanity or cabinet part swap takes one day. A full Wellborn bathroom remodel in Fort Worth takes 2 to 4 weeks depending on plumbing moves, tile work, and whether you’re waiting on a custom finish. We hand you a written schedule before demo starts, and you get photo updates as the work progresses.
We stock Wellborn-compatible hinges, drawer slides, and common door profiles on our trucks, and we also keep KraftMaid, Cambria, and Silestone parts in rotation. Custom Wellborn doors and finishes are ordered to spec, which usually takes 2 to 3 weeks. We’ll tell you up front which category your part falls into and what the wait is.
Need a Wellborn part matched, or a full Fort Worth bathroom remodel quoted? Call (682) 841-6652 for a free estimate. The work talks. We just back it up.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.


