Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Fort Worth Owner’s Guide
If you’re searching for Wellborn driveway and paver components, you’ve likely got a cracked paver, a failing edge restraint, or a base layer that’s started to wash out after a hard Texas rain. A full paver driveway installation in Fort Worth runs $7,000 to $18,000 depending on square footage, access, and base condition, while focused repairs like re-leveling a sunken section or replacing broken pavers typically run $500 to $1,800. We stock common Wellborn-compatible pavers and edge systems on our trucks, and Luca Romano does the walkthrough himself on every paver job because he’s seen too many driveways fail early when the base prep got skipped.
Here’s the thing about pavers in Fort Worth: the clay soil expands and contracts hard with our wet-dry cycles. What looks like a paver problem is usually a base problem underneath. We’ll tell you that before you spend a dime, because replacing pavers on a bad base means you’ll be right back here in two years.
Which Wellborn Models This Applies To
Wellborn’s paver line spans three main profiles: the 60mm residential pavers (standard for driveways), the 80mm commercial-grade units (for heavier vehicles or steeper slopes), and a permeable paver option that’s become popular in Fort Worth neighborhoods where drainage is a headache. The 60mm and 80mm pavers are not interchangeable in the same field – mixing them creates an uneven surface and voids your paver manufacturer’s wear warranty, which most homeowners don’t realize until a wheel catches an edge.
To identify what you’re working with, flip a removed paver over. The mold code is stamped on the underside, usually a letter followed by numbers (W-60 or W-80 series). That code tells us the exact paver, color batch, and profile so we can match it without a visible patch job. For edge restraints and joint sand, Wellborn’s system uses a polymer-modified sand that locks the pavers in place better than standard sand, but it cures hard – if you use the wrong type when re-sanding, you’ll get joint failure within a season. We stock OEM Wellborn pavers for the current colorways and quality aftermarket equivalents for discontinued lines.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Are Failing
- Sunken or depressed sections in the wheel path. This is almost always base compaction failure beneath the pavers. Fort Worth clay shifts when it dries out, and if the gravel base wasn’t compacted in lifts, you get low spots that hold water after rain.
- Pavers rocking or wobbling underfoot. Loose pavers mean the edge restraint has failed or joint sand has washed out. Once water gets under the pavers, it erodes the bedding sand and the whole field starts moving.
- Wide gaps between pavers with weeds growing through. Joint sand has eroded past the point of a simple re-sand. You need the joints cleaned, re-sanded with polymer sand, and possibly new edge restraints installed.
- Cracked or chipped paver surfaces. A cracked paver usually means point pressure – a heavy vehicle, a tree root, or a base void underneath. Replacing the paver without fixing the cause just moves the crack to the next paver over.
- Water pooling instead of running off. Paver driveways should shed water. If you’re getting standing puddles, the slope has settled out or the permeable layer (if you have one) is clogged. Standing water is the fastest way to destroy a paver base in Fort Worth.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Wellborn driveway repairs in Fort Worth fall into one of three price bands. Replacing individual broken pavers (spot repair) runs $250 to $700 per section when we can pull and reset without disturbing the base. Re-leveling a sunken area with base correction runs $800 to $2,500 depending on square footage and how much base material needs to be removed and re-compacted. A full paver driveway replacement runs $7,000 to $18,000 when the base is gone and the existing pavers aren’t salvageable.
Every quote we write includes the line items: paver cost per square foot, base material, edge restraints, joint sand, and labor. You get a written price before we start, and the number on the invoice is the number you approved. No change orders because we “found something” mid-job. The 365-Day Done Right Promise covers the work: if a paver we installed fails within a year, we come back and fix it. That’s in writing.
DIY or Call Us?
You can safely inspect your pavers: look for the signs above, check if edge restraints are visible or buried, and note where water pools after rain. That information saves us time and you money on the estimate. You can also re-sand joints with the correct polymer sand if the gaps are hairline and the pavers aren’t moving yet.
Where DIY goes wrong is base work. Pulling pavers, re-grading, and re-compacting a base requires plate compactors, the right gravel spec, and an honest read on drainage. We see homeowners lay new pavers over a failed base every year, and it costs more to fix the second time than it would have to do it right the first. If your pavers are moving, cracked, or sinking, call us at (682) 841-6652. Luca will walk the driveway with you and tell you straight what needs to happen and what it costs.
FAQs
A properly installed paver driveway with a correct compacted base should last 25 to 30 years in Fort Worth, with the pavers themselves outlasting the base if the base was done right. The failure point is almost never the paver – it’s the clay soil shifting and the base responding poorly. If you’re seeing failure before 10 years, it was a base problem from day one. Call (682) 841-6652 and we’ll confirm what’s happening before you spend money on a guess.
A cracked paver gets replaced, not repaired – paver epoxies fail under vehicle weight and Texas sun, and a patched paver looks like a patch forever. The real question is why it cracked, and that’s where our walkthrough matters before any quote. Call (682) 841-6652 to schedule a free estimate and Luca will tell you if it’s a one-paver fix or a base issue underneath.
A spot repair (a few pavers) takes a half day. Re-leveling a sunken section takes one to two days including base correction and re-compaction. A full paver driveway replacement in Fort Worth runs three to five days depending on square footage and whether we’re removing an old driveway first. You’ll get a written schedule before we start, and photo updates through the job so you see the work happening in real time.
We stock common Wellborn 60mm pavers in the current Fort Worth colorways on our trucks, plus a limited stock of 80mm units for commercial-style driveways. Discontinued Wellborn colors may need a match-and-order, and we’ll show you the closest aftermarket equivalent before you commit. Call (682) 841-6652 with your paver’s underside mold code and we’ll tell you over the phone if it’s a today job or an order job.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
