Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Fort Worth Owner’s Guide
A full PGT kitchen remodeling project in Fort Worth typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and whether we’re moving plumbing or walls. We stock PGT-compatible hardware, hinges, drawer glides, and cabinet components locally, and in most cases we can have a technician at your door within a day or two of your call. Most Fort Worth homeowners discover the problem the hard way: a drawer that won’t close, a hinge that snapped mid-swing, or a cabinet door that suddenly hangs crooked and scrapes the frame every time you open it.
You’re not looking for a handyman with a bucket of random screws. You’ve got PGT cabinetry in your kitchen, and you want someone who knows how it’s built and what fits it. That’s exactly what we do. Luca Romano and the Sawyer Remodel Fort Worth crew have been working on PGT kitchens across Fort Worth for years, including jobs near the Cultural District, TCU, and out toward Benbrook. We’ll tell you straight: some parts are a quick swap, some aren’t, and we’ll never sell you a replacement you don’t need.
Which PGT Models This Applies To
PGT builds kitchen cabinetry across several series lines, and the part you need depends on which one you have. The most common Fort Worth kitchens we work in fall into three groups: PGT’s framed cabinet lines with face-frame construction, their frameless full-overlay lines, and the builder-grade PGT Select series we see a lot of in homes built from the late 2000s through the 2010s across Tarrant County.
Here’s the compatibility gotcha most people miss: PGT drawer glide mounting specs changed around 2014. If your kitchen was installed before that, the drawer glides use a different screw pattern and rear socket than the current PGT glide hardware. A glide that looks identical on the shelf won’t seat properly, and aftermarket “universal” glides almost never fit PGT’s older frameless boxes without drilling new holes. When you call us, we’ll ask for the cabinet model number if you can find it: there’s a white sticker on the inside of the sink base cabinet door, top hinge side. If that sticker’s gone, a photo of the drawer box with the drawer out plus the slide itself is usually enough for Luca to identify it.
For hinges on PGT doors, the critical spec is the bore pattern. PGT’s full-overlay doors use a 35mm cup hinge with a 9mm overlay on most models; their framed doors use either a 1/2″ or 5/8″ overlay depending on the year. A wrong-overlay hinge makes the door sit proud of the frame or bind against the cabinet next to it. OEM PGT hinges are the right call when you can get them; for older discontinued models, we use Blum hardware, which is the same manufacturer PGT used on many lines, so aftermarket Blum parts are functionally identical, not a downgrade. Sawyer Remodel Fort Worth is an independent remodeler and parts installer; we’re not affiliated with PGT itself, but we source direct from the same manufacturers and distributors that supply the Fort Worth market.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- Drawer sticks, wobbles, or dives when you open it. The nylon rollers on PGT’s older undermount glides flatten over time, especially in Texas heat that bakes the lubricant right out of the slide. When the roller’s flat, the drawer box tilts forward and the front plate starts banging the cabinet face.
- Door won’t stay closed, or swings open on its own. That’s a sprung hinge, and the cause is usually a stripped screw behind the hinge cup. PGT’s cabinet boxes are dense particleboard; once a screw strips, the hinge loses tension and the door just hangs there.
- Corner cabinet door scrapes the door next to it. PGT’s overlay tolerances are tight. When a door sags even 3 or 4 degrees, the corner catches. It’s never the door’s fault; it’s a hinge losing its load rating or a face-frame joint that worked loose from Fort Worth’s humidity swings.
- Soft-close drawer slams or feels dead. PGT uses a damper cartridge inside the glide. The internal seal dries out after six to ten years, especially in kitchens with a gas range putting heat into the drawer stack next to it. Once the seal goes, the damper stops cushioning and the drawer slams like a screen door.
- Fingerprints and clouding on cabinet fronts that won’t clean off. Not every PGT kitchen problem is a broken part; it’s a finish failure. PGT’s earlier foil-wrapped doors delaminate at the edge when they sit near a dishwasher vent or a stove that throws steam. That’s a door-front replacement, not a cleaning product fix.
Replacement Cost & What’s Included
A full PGT kitchen remodel in Fort Worth runs $14,000 to $45,000 installed. That range covers everything from a cabinet-box refresh with new doors, drawers, and hardware in a smaller footprint to a complete gut-and-rebuild with new PGT or equivalent cabinetry, counters, and electrical work. Small kitchen remodels land between $9,000 and $20,000; cabinet installation alone runs $4,000 to $13,000 depending on linear feet and whether we’re pulling the old boxes or reusing them. Countertop installation on a PGT kitchen is $2,000 to $6,500, and backsplash work is $800 to $2,500.
Every quote we write is a line-item price: parts, labor, disposal, and the finish work, in writing, before a single tool gets picked up. The number you approve is the number you pay; there are no change orders for things we should have caught in the walkthrough. Luca does the walkthrough himself, measures everything, and verifies the compatibility before we order a single part. The 365-Day Done Right Promise covers the work for a full year: if something’s not right, we come back and make it right, in writing on every project.
What drives the price? Cabinet door count, glide type (soft-close vs. standard), whether we’re matching PGT’s paint code or re-wrapping doors, and how much of the kitchen we’re refacing versus replacing. A 12-foot galley kitchen with ten doors and four drawers is a different job than a 28-foot open-plan kitchen with a 10-foot island and 42 uppers.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some PGT repairs are genuinely doable if you’re comfortable with a drill and a level: swapping a hinge on a door that still seats properly, tightening a loose glide screw, or replacing a drawer pull. If the cabinet box is sound and you’re only dealing with a worn hinge or a sticking glide, that’s a Saturday project with the right part in hand.
What we’d tell you not to touch: any repair involving a cabinet face-frame joint that’s pulling apart, any drawer box that’s delaminating, or any door replacement where you have to match PGT’s paint or foil color on a kitchen that gets used daily. Here’s what most homeowners don’t see coming: PGT doors are weight-balanced, and a wrong hinge or an overlay that’s off by 2mm means a door that never closes right again. You’ll spend a weekend chasing it, then call us anyway. If you’re anywhere near the Cultural District, Arlington Heights, or West Fort Worth, call us at (682) 841-6652, and we’ll tell you over the phone whether it’s a DIY job or a service call.
Key Takeaways
- PGT kitchen remodels in Fort Worth run $14,000 to $45,000 installed; small projects start near $9,000.
- PGT changed drawer glide specs around 2014, so pre-2014 kitchens need exact-model matching, not “universal” hardware.
- Soft-close dampers and nylon rollers are the two parts we see fail most in Texas heat, usually between six and ten years.
- We’re an independent Fort Worth remodeler, not PGT-affiliated, but we source the same OEM and Blum hardware PGT used.
- Sawyer writes the price before we start, and the 365-Day Done Right Promise covers the work for a full year.
FAQs
Most PGT cabinets in Fort Worth homes hold up for 15 to 25 years on the boxes, but the moving parts wear out sooner: hinges and drawer glides typically fail between 8 and 12 years, and soft-close dampers go earlier if the kitchen gets heavy daily use. Texas heat accelerates the lubricant breakdown, which is why we see more glide failures in Tarrant County than you’d see in cooler climates. If you’re catching the wear before the drawer box itself is damaged, you’re replacing parts, not cabinets. Call (682) 841-6652 and we can assess over the phone or in person.
Hinges and glides are replace, not repair, parts; once a roller flattens or a damper seal dries out, there’s no practical way to rebuild it that’s cheaper than a new part. What you can sometimes save is the cabinet box: a stripped hinge screw hole can be plugged and re-drilled, and a sagging face frame can be pulled back square. We’ll always tell you if a repair gives you another five-plus years instead of a full replacement. Call (682) 841-6652 for a straight answer on your kitchen.
A typical hinge or drawer glide swap runs 1 to 3 hours on site, and we usually have the parts in hand if we’ve seen photos beforehand. If the job is a full door-and-drawer reface, plan for 3 to 5 days depending on paint matching and how many doors we’re re-wrapping. A full PGT kitchen remodel runs 4 to 8 weeks from demo to finished tile and trim, and we’ll give you a written schedule before we start. Call (682) 841-6652 and we’ll give you a realistic timeline for your specific kitchen.
We stock the most common PGT hinges, glides, dampers, and drawer hardware on our trucks for same-day and next-day visits across Fort Worth. For older or less common PGT series, we order directly from our distributors and typically have parts in hand within 3 to 5 business days. We’ll confirm availability before we schedule the visit, so you’re not sitting at home waiting on a part that hasn’t arrived. Call (682) 841-6652 and we’ll check stock while you’re on the phone.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
