Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Fort Worth Owner’s Guide
CGI fence installation in Fort Worth typically runs $3,500 to $9,000 for a full perimeter job, with most homeowners paying somewhere in the middle depending on footage, gate count, and the condition of the existing posts. We stock CGI-compatible hardware and panels on our trucks, so if your current fence has a failed section or the whole run needs replacing, we can usually get it handled without multiple trips across town.
Most Fort Worth owners discover they need us when a section starts leaning after a spring storm, a gate stops latching cleanly, or the bottom rail rusts through where the sprinklers have been hitting it for years. You’ll see the problem before you hear it: posts that were straight last summer now angle toward the alley, panels that rattle in the wind, or a gate that drags against the concrete. That’s the point where patching stops making sense and a proper install starts.
Which CGI Models This Applies To
CGI fencing comes in a few distinct lines, and the part you need depends on which one you have. The most common installs around Fort Worth are the CGI Premier and CGI Estate series: heavier gauge steel posts, welded panel construction, and a powder coat finish that holds up better than the thin vinyl wraps you see on big-box fence kits. If you’ve got a c-channel bottom rail or a bolt-together panel system, that’s almost certainly an Estate or Premier panel. Lighter residential lines use a thinner post wall and slide-rail brackets instead.
Here’s the compatibility gotcha nobody warns you about: CGI changed its bracket pattern on the Estate line in 2019. If your fence was installed before that and you buy current-gen brackets, the bolt holes won’t line up. You can’t just eyeball it, either. The way to confirm is to measure the bracket spacing center-to-center: 3-1/2 inches is pre-2019, 4 inches is the newer pattern. We check this on every CGI job before ordering parts, because a wrong bracket order costs you a week of waiting and a restocking fee on our end. For Fort Worth weather specifically, the OEM powder coat holds up, but third-party aftermarket panels from Texas fence supply houses often skip the zinc undercoating. That’s why we recommend OEM CGI panels or the one aftermarket line we’ve verified for the local climate, not whatever’s cheapest on a supply yard shelf.
Styles & brands we work with
Signs Your CGI Fence Installation Is Failing
- Posts leaning at the base. Fort Worth’s clay soil expands and contracts hard through the seasons. If your posts were set in shallow concrete back when the fence went in, the ground movement works them loose over time. You’ll see a visible gap between the post and the concrete collar at ground level.
- Gate sagging or refusing to latch. This usually means the hinge side post has shifted or the gate frame itself has started to bow. Once a gate loses its square, the latch and keep will never line up right again without either re-hanging it or replacing the frame section.
- Rust bleeding from the bottom rail or post bases. CGI’s powder coat is good, but it’s not immortal. Sprinkler overspray, standing water after heavy Texas rain, and fertilizer runoff all eat through the coating at ground contact. If you see orange streaks staining the concrete below a post, that post is already rusting from the inside.
- Panels rattling or flexing when the wind picks up. A properly installed CGI panel should be dead solid. If yours are flapping even a little, the bracket fasteners have loosened or the posts have shifted enough to break the tension. Left alone, loose panels stress the brackets until something snaps.
- Missing or broken panel clips. These are the small parts that fail first. They take the brunt of every wind gust and temperature swing. Once a few clips go, the panel starts vibrating, which breaks more clips faster. It’s a cascade, and the fix is replacing all of them on that run, not just the ones you can see missing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full CGI fence installation in Fort Worth runs $3,500 to $9,000. A small yard with a single gate on level ground lands near the bottom. A larger lot with multiple gates, a long alley run, or posts that need pulling and resetting in deeper concrete pushes toward the top. The biggest cost drivers are total linear footage, how many old posts need demolition, and whether you’ve got gates that need new frames instead of just new hardware.
What’s included in our price: full tear-out and haul-away of the old fence, new posts set to a depth that handles Fort Worth’s clay movement, CGI panels and hardware, all gates re-hung and adjusted, and a written line-item breakdown before we start. No change orders unless you ask for something extra. The work is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing on every job.
DIY or Call Us?
You can safely check a few things yourself: look at the bracket pattern we described above, measure your property line to get rough footage, and note which posts are loose versus still solid. That info helps us quote the job accurately over the phone.
Where DIY goes wrong is the posts. Setting fence posts in Fort Worth means digging below the frost line and accounting for expansive clay, which shifts more than most people expect. Undersized holes, shallow concrete, or skipping gravel drainage at the base will have your new fence leaning within two years. Gates are the other silent killer: a gate that’s off by half an inch at the hinge means a latch that never closes right. High-tension? No. But it’s still a multi-day project that requires two people and the right tools, and fixing a botched post job costs more than the install would have in the first place. If you want it done once, call (682) 841-6652 and we’ll get you a written quote.
FAQs
A properly installed CGI fence in Fort Worth should last 20 to 30 years, assuming the posts were set correctly and you keep sprinklers from hammering the base of the posts. The panels themselves rarely fail; it’s the posts and the small hardware that go first in our climate.
If the panels are still solid and only a few posts have shifted, yes, we can often repair the fence by resetting posts, replacing clips, and re-hanging gates. If the posts are rusted through at the base or the panels are compromised, replacement is the cheaper long-term answer.
Most CGI fence installations in Fort Worth take 2 to 4 days from demo to final gate adjustment, depending on footage and how many old posts need pulling. We’ll give you a written timeline with the quote so you know what to expect.
We keep CGI-compatible brackets, clips, gate hardware, and common panel sizes on our trucks, which means most repairs are handled in one visit. If your specific panel length or bracket pattern isn’t on the truck, we order it and schedule the install the same week. Call (682) 841-6652 for an exact quote; estimates are free.
Need a CGI fence replaced or repaired in Fort Worth? Call Sawyer Remodel Fort Worth at (682) 841-6652. We’ll send a background-checked, uniformed technician to walk the property, confirm the bracket pattern, and hand you a written price before any work starts. The work talks. We just back it up.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
