Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Fort Worth Owner’s Guide
A full CWS kitchen remodeling in Fort Worth typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much layout work the space needs. We stock and install CWS-compatible cabinet hardware, drawer slides, hinge systems, and trim kits, and we can usually match what you have without tearing out the whole kitchen. Most owners find us the same way: a drawer stops closing, a hinge snaps mid-swing, or a cabinet door hangs crooked after years of daily use, and suddenly the whole kitchen feels off.
The good news is you rarely need a full remodel to fix a failed part. We match what’s broken, replace it, and keep the rest of the kitchen intact. Luca Romano has walked hundreds of Fort Worth kitchens where one bad hinge or one stripped drawer slide had the homeowner convinced they needed a $40,000 gut job. Half the time, the fix is under $300.
Which CWS Models This Applies To
CWS cabinetry shows up in Fort Worth homes under a few different series names, and the hardware isn’t always interchangeable between them. The main lines we see are the CWS Classic series, the CWS Select series, and the CWS Custom series, each with different hinge cup sizes and drawer slide mounting patterns. Classic and Select use a 35mm cup hinge with a standard overlay, but the Custom line runs a 40mm cup on inset doors, which means a Classic hinge will not sit flush in a Custom door. That’s the number one compatibility gotcha we fix after a homeowner tries to match parts online.
To identify what you have, pull a hinge off one door and look for a stamped code on the inside face. CWS typically stamps a two-letter series code near the cup, and that code tells us the exact replacement before we even come out. If there’s no stamp, measure the hinge cup diameter and the overlay distance from the door edge to the cup center. For drawer slides, check the side-mounted runner width: CWS Classic uses a 45mm runner, Select uses 42mm, and Custom uses a ball-bearing full-extension slide that runs 50mm. We stock OEM CWS hardware on the truck along with quality aftermarket equivalents from Blum and Salice. The aftermarket Blum slides actually outlast the original CWS units in most Fort Worth kitchens, and they cost about 20% less.
Styles & brands we work with
Signs Your CWS Kitchen Remodeling Is Failing
- A cabinet door drops or sags when open. The hinge spring has lost tension or the cup has wallowed out of the door’s drilled recess. CWS Classic hinges fail this way after 8 to 12 years of regular use in our climate.
- A drawer grinds or catches mid-pull. The ball bearings inside the slide have worn flat or one rail has bent slightly. Once metal touches metal, the slide eats itself and the drawer gets worse every week.
- A door won’t stay closed and bounces back open. The self-close mechanism is shot, which is common in Select series kitchens where the plastic catch inside the hinge wears down from Fort Worth’s dry heat cycling.
- Soft-close stops working on one side only. One damper failed while the other still works, so the door slams crooked. It looks like an alignment problem but it’s almost always a dead damper.
- You see hairline cracks around the hinge screw holes. The door face is starting to split where the hinge mounts. This is repairable if caught early with a proper wood-fill and redrill; wait too long and the door needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CWS kitchen remodeling in Fort Worth runs $14,000 to $45,000. But if you’re replacing failed parts rather than the whole kitchen, here’s how the numbers break down:
- Hinge replacement (per door): $35 to $90 installed
- Drawer slide replacement (per drawer): $45 to $120 installed
- Full hardware swap on a 12-cabinet kitchen: $500 to $1,100 installed
- Cabinet installation (if you need new boxes): $4,000 to $13,000
- Full kitchen remodel (cabinets, counters, backsplash, island): $14,000 to $45,000
Every price is written down before we touch a cabinet, and the number on the invoice is the number you approved. No change orders unless you ask for extra scope. Our work carries the 365-Day Done Right Promise: if a hinge we installed fails within a year, we come back and fix it. No invoice, no argument, no “well, that’s normal wear.”
DIY or Call Us?
You can check a few things yourself without touching a tool. Look for the stamped code on the hinge cup. Test whether the problem follows the door or the cabinet by swapping the hinge from a working door onto the failing one. If the problem moves with the hinge, it’s the part. If it stays with the cabinet, the box itself is out of square and you’re looking at a bigger fix.
Where DIY goes wrong is the screw holes. CWS doors are solid wood but the hinge mount area gets brittle with age, and one over-torqued screw will split the door face. We also see a lot of homeowners buy the wrong cup size online because the listing looked right in the photo. If you’re not sure, call (682) 841-6652 and we’ll match the part same day. The diagnostic visit is free when you hire us for the repair.
FAQs
Expect 8 to 12 years from original CWS hinges and slides in Fort Worth’s dry, hot climate, which accelerates plastic damper wear and spring fatigue. Aftermarket Blum replacements typically last 15 years or more. Call (682) 841-6652 if yours are failing early.
Hinges and slides are not cost-effective to repair because the internal components aren’t serviceable; replacement is faster and cheaper. We can sometimes repair a split door face around the hinge mount with wood-fill and a redrill, saving the door itself. Call us for a straight answer on whether your specific part is worth saving.
Most single-part replacements take under an hour, and a full 12-cabinet hardware swap is a half-day job. We carry the common CWS-compatible hardware on the truck, so there’s no waiting on parts for most Fort Worth kitchens. Call (682) 841-6652 to schedule a time that works.
We stock OEM CWS hinges and slides for the Classic, Select, and Custom series on the truck, along with Blum and Salice aftermarket equivalents. If you have an unusual CWS model, we can typically have the exact part in hand within two business days. Call us with the stamped code and we’ll confirm before you book.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
