CWS Fence Installation Nationwide

CWS Fence Installation: The Fort Worth Owner’s Guide

We install and replace CWS-brand fence systems throughout Fort Worth, and a full CWS fence installation typically runs $3,500 – $9,000 depending on linear footage, gate count, and whether we’re pulling old posts or driving new ones. We stock CWS-compatible panels, posts, and hardware on our trucks, so most residential installs go from torn-out to walk-through ready in one day. Most owners catch the problem the same way: a gate that drags, a panel that leans after a storm, or a post that snaps at ground level where sprinkler water has been eating at it for years. If that sounds familiar, you’re in the right place.

Call (682) 841-6652

Which CWS Models This Applies To

CWS builds a handful of distinct fence lines, and the part numbers matter more than most people think. The two we see most in Fort Worth are the CWS Select line (residential grade, 6-foot panels, powder-coated steel posts) and the CWS Commercial line (heavy-gauge posts, often 8-foot, with thicker panel rails). The gotcha: Select panels will not seat properly on Commercial posts at full height. The post brackets are different, and forcing it leaves you with a fence that rattles in the wind. If you can’t find a label, measure the post. CWS Select posts are 2-inch square. Commercial posts are 2.5-inch square. That one measurement tells us exactly what we’re working with before we ever set foot on your property. For replacement parts, we recommend OEM CWS panels when the fence is under five years old and you want a perfect color match. Beyond that, the sun has faded the finish enough that a quality aftermarket panel in the same profile often looks more uniform than a brand-new OEM panel next to five-year-old neighbors. We’ll show you both options and quote it straight.

Signs Your CWS Fence Installation Is Failing

• Gate dragging or catching. The hinge post has shifted, usually because the concrete footing was poured shallow or the post base is rusting below the soil line. A dragging gate is the first sign you’ll notice, and it only gets worse.
• Panels leaning after wind. Fort Worth gets real gusts, and a panel that moves more than an inch in the wind means the rail brackets have worked loose or the post has flexed past its useful life. Left alone, the next big storm takes the whole section down.
• Post snapped at ground level. This is the classic CWS failure in North Texas. Sprinkler overspray keeps the base damp, the powder coat eventually loses the battle, and rust does the rest. We see it constantly in neighborhoods like Wedgwood, Arlington Heights, and Ridglea.
• Rust streaks below the post caps. Water sits inside the post after rain, and CWS posts without a sealed cap fill up and rust from the inside out. The streaks are the giveaway that the post is compromised even if it’s still standing.
• Loose rail brackets or missing screws. The panel rails connect to the posts with a bracket system that can vibrate loose over years of slamming gates and hard Texas sun expanding and contracting the metal. Once brackets go, the panel starts sagging and stressing the remaining connections.

Replacement Cost & What’s Included

In Fort Worth, a CWS fence installation or full replacement runs $3,500 – $9,000. The range breaks down like this: material cost for panels, posts, brackets, and caps runs $18 – $32 per linear foot depending on the CWS line and panel height. Labor runs $12 – $18 per linear foot, including pulling old posts, setting new concrete footings, and hauling off the old fence. A standard 150-foot backyard with one gate lands around $5,500. A 250-foot property line with two gates and difficult access runs toward the top of the range. Every quote includes the materials, labor, haul-off, and a written line-item price you approve before we order anything. The work itself carries our 365-Day Done Right Promise: if the fence isn’t right, we come back and make it right. No argument, no invoice.

DIY or Call Us?

You can absolutely check the easy stuff yourself: measure your posts, look for part numbers on the panels, and figure out how many linear feet you’re replacing. That helps us quote you faster. But actually setting CWS posts is where DIY goes sideways. The posts need to be set in 24 inches of concrete that’s allowed to cure before panels hang, and if a post is even 3 degrees off plumb, the gate will never close right. We’ve torn out plenty of weekend jobs where a homeowner did everything correctly except level the post, and the gate sagged within a month. It’s not dangerous like a spring under tension, but it’s frustrating work that’s easy to get wrong. If you want it done once and done right, call us at (682) 841-6652. We’ll give you a written price before we dig a single hole.

Key Takeaways

• Full CWS fence installation in Fort Worth runs $3,500 – $9,000, with most standard backyards landing around $5,500.
• Post measurement is the fastest way to identify your CWS line: 2-inch square is Select, 2.5-inch is Commercial.
• Rust at the post base is the number one killer of CWS fences in North Texas, usually from sprinkler overspray.
• OEM panels make sense under five years old. After that, color-matched aftermarket often looks better.

FAQs