Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Fort Worth Owner’s Guide
We stock and install CWS-compatible driveway and paver components in Fort Worth, with full paver driveway installation running $7,000 – $18,000 and driveway replacement between $5,000 – $14,000. Most CWS paver failures show up as shifting bricks, sunken sections, or crumbling edge restraints after a hard Texas freeze-thaw cycle. You’ll usually spot the problem long before it becomes a full driveway failure, and that’s exactly when you want to call us at (682) 841-6652 before the base layer washes out and doubles the repair bill.
Here’s the thing most Fort Worth homeowners don’t realize until it’s too late: CWS pavers themselves rarely fail. The base underneath does. When you see a paver sitting low or wobbling underfoot, the sand and gravel bed beneath it has shifted, and that’s a repair you want done before water starts routing under the adjacent pavers and turning a $600 fix into a $9,000 redo. We’ve pulled up CWS paver sections across Fort Worth neighborhoods like Fairmount and Wedgwood where the pavers looked perfect from above, but the base had washed out completely underneath.
Which CWS Models This Applies To
CWS driveway and paver systems run across several product lines, and the compatibility gotcha in Fort Worth is real: CWS concrete pavers are not interchangeable with their clay brick units in load-bearing applications. A CWS concrete paver laid to driveway spec carries a different compressive strength rating than a pedestrian-grade unit, and swapping one for the other under vehicle traffic is how you end up with cracked corners within two seasons. If you’ve got the original paperwork, check the SKU prefix: CWS residential driveway pavers typically start with a 3-series designation, while walkway and patio units run a 2-series. No paperwork? Flip a loose paver over. CWS stamps the underside with a mold code and sometimes a date lot, and we can match it from a photo in about five minutes.
On the OEM-versus-aftermarket question for CWS specifically: we install genuine CWS pavers when the existing pattern is still available, but we’ll tell you honestly when a quality aftermarket equivalent from a Texas distributor saves you 25 – 40% with no lifespan difference. Fort Worth’s clay-heavy soil and flash-flood drainage patterns punish pavers differently than, say, a Dallas suburb with different subgrade, so we match the unit to the soil conditions, not just the color swatch.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Is Failing
- Paver rocking or wobbling underfoot or under a tire. The sand bedding layer thinned out or washed away beneath that specific unit, and if you ignore it, the paver edges start chipping against each other.
- Faint low spot forming in one section of the driveway. The gravel base has settled unevenly, usually where water pools after a Fort Worth downpour. Sunken spots hold water and accelerate paver degradation every time it sits there overnight.
- Edge restraint pulling away or cracking along the driveway border. CWS paver systems depend on rigid edges to hold the field tight. Lose the restraint, and the outer pavers start drifting outward, opening ever-wider joints.
- Weeds or sand eroding up between joints. Polymeric sand has failed or was never applied properly. In Fort Worth’s wet springs, failed joint sand lets every rain event mine more base material out from under the pavers.
- Surface efflorescence, white crusting, or crumbling edges on pavers that once looked clean. This is a moisture cycle issue paired with a lower-grade unit. CWS clay pavers show this faster when drainage underneath is poor and water wicks up through the brick.
One honest note before you grab a pry bar: pulling up a CWS paver bed on your own to “take a look” almost always breaks the interlock. Pavers are designed to distribute load together, and once you disturb a section without re-compacting the base and re-screeding the sand, that section will never sit flat again. If you’re at the point where you’re lifting pavers, that’s the moment to call (682) 841-6652.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a full CWS paver driveway installation runs $7,000 – $18,000, and driveway replacement (tear-out, base rework, new pavers or surface) lands between $5,000 – $14,000. Where you fall in that range comes down to square footage, whether the existing base is salvageable or needs to be excavated to clean subgrade, and the specific CWS paver line you’re matching or upgrading to.
| Scope | Typical Range (Fort Worth) |
|---|---|
| Paver driveway installation (full, new) | $7,000 – $18,000 |
| Driveway replacement (incl. base rework) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Partial paver bed repair (small section) | Call for written quote after inspection |
Every CWS paver job from Sawyer Remodel Fort Worth includes a written price before any work starts, so the number on the invoice matches the number you approved. No change orders hiding in the middle, no “we found something” surprises when the base is opened up. The 365-Day Done Right Promise applies to every paver repair and installation: if the work isn’t done right, we make it right, backed in writing. Luca Romano, Owner & Lead Remodeler, walks these jobs himself before we close a single section of pavers.
DIY or Call Us?
What you can safely do on your own: sweep the joints and note where sand is washing out, monitor low spots after rain, and check whether the edge restraint is pulling loose. That information helps us quote accurately from photos. What you should not do: lift pavers, cut in a new edge, or attempt to re-level a sunken section with playground sand from a big-box bag. It compacts wrong, drains wrong, and makes the eventual professional repair more expensive because now we’re fixing your fix before we can fix the driveway.
As an independent Fort Worth service provider, we’re not affiliated with CWS, and that’s worth saying plainly: we don’t push OEM parts when a better local equivalent exists, and we don’t cover for a manufacturer’s under-spec’d product. We’ll tell you what the paver needs, what the base needs, and what it costs. Call (682) 841-6652 for a free estimate, and we’ll come measure, assess the base, and hand you a written price while we’re still on site.
FAQs
CWS pavers, when installed over a properly compacted base with correct joint sand, can last 25 – 40 years in Fort Worth’s climate, but only if the base and drainage are done right. The pavers themselves will outlast two or three sand re-joints. What kills them early is water sitting under the bed, and Fort Worth’s flash-flood downpours make subsurface drainage the deciding factor. If your base was never built for our soil, you’ll see failures in 5 – 8 years. Call (682) 841-6652 and we’ll inspect yours for free.
A single cracked or chipped CWS paver can absolutely be swapped out without redoing the driveway, provided we can still match the mold code and color lot closely. If the damage traces back to a base failure instead of a one-off impact, replacing only the paver just hides the problem for a season or two. We’ll tell you which situation you’re in before we quote anything.
A full CWS paver driveway replacement in Fort Worth typically takes 5 – 10 working days from tear-out to final sand and compaction, depending on square footage and whether the base needs full excavation. Weather delays happen, but if the subgrade is dry and the pavers are on site, a standard two-car drive is about a week. You get a written timeline before work starts, and photo updates throughout.
We don’t stock every CWS SKU year-round because Fort Worth homeowners run dozens of different patterns and colorways across the city, but we source directly through Texas distributors and can have matching units on site within days. If you need one or two replacement pavers, send us photos and we’ll match them before we schedule the repair. Call (682) 841-6652 for an exact quote, and estimates are free.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
