Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Fort Worth, TX
Backsplash, tile, and flooring work in Fort Worth typically runs $12 to $38 per square foot installed, with a standard kitchen backsplash landing between $900 and $2,600 all-in. Most of our Fort Worth jobs are done in 2 to 5 days depending on the material and square footage. Sawyer Remodel Fort Worth handles the full spread: ceramic, porcelain, natural stone, luxury vinyl plank, and engineered hardwood, with a written price in your hands before we cut a single tile.
Call (682) 841-6652 for a free estimate, or read on to see how we approach the work and what it costs across Fort Worth neighborhoods like Fairmount, Wedgwood, Ryan Place, and Arlington Heights. If you’re planning a larger project, this service pairs directly with our Kitchen Remodeling in Fort Worth team, so the tile work and cabinet install land on the same schedule.
When You Need Backsplash, Tile & Flooring
Here’s what Fort Worth homeowners usually tell us when they call. If any of these hit close to home, you’re in the right place:
- Your kitchen backsplash is cracked, stained, or just dated. Grout lines go dark, tiles shift with the foundation movement common in North Texas clay soil, and a tired backsplash drags down a kitchen even when the cabinets are fine.
- You’re replacing countertops and the old backsplash has to come out with them. Demolition rarely stops at the counter’s edge. Tile pops, drywall tears, and you need a crew that can patch and tile in the same visit.
- Your bathroom floor has water damage or loose tile. Fort Worth homes built in the 1950s and 60s, especially in Ridglea Hills and Wedgwood, often have original mud-set tile that shifts as the subfloor ages.
- You want to sell soon and the floors are hurting showings. Buyers in this market notice scratched vinyl and chipped tile immediately. A mid-range flooring refresh on a 1,500-square-foot home usually pays for itself at resale.
- You’re moving into an older home with original flooring. Homes in Arlington Heights and Mistletoe Heights have character, but also decades of wear, pet stains, and squeaky subfloors that new flooring needs addressed first.
- You just want to stop scrubbing grout. Larger-format porcelain tile means fewer grout lines, less maintenance, and a cleaner look. We lay out the tradeoff between slate, porcelain, and glass mosaic so you know what you’re actually choosing.
Our Backsplash, Tile & Flooring Process
Every project runs under The Relay Visibility Guarantee: a written price before work starts, a live arrival time the day of, and before-and-after photo updates. Here’s how a typical Fort Worth tile or flooring job goes:
- Measure and scope. We measure the space, check for subfloor movement, and inspect what’s under the existing surface. In Fort Worth, we look for slab foundation cracks and moisture issues before suggesting any flooring, because tile over a shifting slab fails fast.
- Written price and material selection. You get a line-item quote that stays fixed. We walk you through material options, including Cambria quartz for countertops if the backsplash coordinates, and KraftMaid or Wellborn cabinetry if the kitchen is getting a fuller refresh alongside the tile.
- Prep work. We pull old flooring, patch subfloor, level low spots, and waterproof wet areas. Backsplash walls get smoothed and primed so the tile bonds correctly the first time.
- Installation. Tile goes down with proper spacing, level lines, and the right thin-set for the material. For wet areas, we use Schluter edge trim where tile meets floor or shower pan, and we install waterproofing membrane behind shower tile, not just cement board.
- Grout, seal, and finish. We grout, clean, seal natural stone or porous tile, and install baseboards or shoe molding. Floors get a final sweep and mop so you can walk on them the day we finish.
- Walkthrough and sign-off. You inspect everything with our tech, approve the work, and the invoice is paid through a digital link. The 365-Day Done Right Promise starts the day we finish: if something isn’t right, we come back and make it right, in writing.
Backsplash, Tile & Flooring Pricing in Fort Worth
Here’s what we charge for the common jobs. These are installed prices, labor and materials included, based on Fort Worth market rates as of 2026. Your exact quote depends on square footage, material choice, and what prep the subfloor or wall needs:
- Kitchen backsplash: $900 – $2,600 for a typical 25 – 45 sq. ft. kitchen. Ceramic and subway tile sit at the lower end; glass mosaic and natural stone push toward the top.
- Bathroom floor tile: $1,400 – $3,800 for a 40 – 80 sq. ft. bathroom. Porcelain runs less than marble or travertine, and heated floor systems add roughly $900 – $1,800.
- Full kitchen floor: $2,200 – $5,500 for 200 – 400 sq. ft. Luxury vinyl plank lands on the low side; large-format porcelain tile or engineered hardwood lands mid to high.
- Whole-home flooring (1,500 – 2,500 sq. ft.): $9,000 – $32,000 depending entirely on material. LVP starts around $4.50/sq. ft. installed; hardwood runs $12 – $20/sq. ft. installed.
- Shower tile (walls and pan): $2,800 – $7,500. This includes waterproofing, Schluter trim, and tile. Slab or glass enclosures are additional.
What moves the price most in Fort Worth: the condition of the subfloor (old pier-and-beam homes often need joist work), the size of the tile (larger formats cost more to install because of the handling and layout), and whether you choose porcelain, natural stone, or luxury vinyl. We’ll always give you the range before you commit, and the written price before we start. Call (682) 841-6652 for a free estimate with numbers specific to your house.
FAQs – Backsplash, Tile & Flooring
How much does a kitchen backsplash cost in Fort Worth?
A kitchen backsplash in Fort Worth typically costs $900 to $2,600 installed for a standard 25 to 45 square foot kitchen, depending on whether you pick subway tile, glass mosaic, or natural stone. Most jobs land around $1,400. Call (682) 841-6652 and we’ll give you a written range for your exact kitchen before you decide anything.
Can you replace tile flooring without tearing out the old floor?
In most Fort Worth homes, no, and we won’t recommend it. Tile over tile raises the floor height, creates uneven transitions at doorways, and doubles the weight on a subfloor that older slab or pier-and-beam foundations weren’t built to carry. We pull the old floor down to the subfloor, inspect for damage, and install from clean decking so the new floor lasts.
Is luxury vinyl plank better than tile for Fort Worth homes?
Luxury vinyl plank handles North Texas slab movement better than tile because it flexes; tile cracks when the foundation shifts. LVP costs roughly $4.50 to $8 per square foot installed, while tile runs $9 to $20, so LVP is also cheaper. If you’re in an older home with known foundation movement, LVP is the safer bet; if you’re in a newer slab home and want the look of stone or porcelain, tile works well.
How long does a bathroom tile floor take to install in Fort Worth?
Most bathroom tile floors in Fort Worth take 2 to 3 days including demo, subfloor prep, tile install, grout, and cleanup. Heated floors, custom patterns, or full shower surrounds push toward 4 to 5 days. We’ll give you the exact timeline in the written quote before work starts. Call (682) 841-6652 for a schedule and a fixed price.
Written by Luca Romano, Owner at Sawyer Remodel Fort Worth, serving Fort Worth.
