Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Fort Worth?
Aluminum fence installation in Fort Worth typically costs $4,000 to $10,000 for a standard residential yard of 150 to 200 linear feet, with most homeowners landing around $6,500. You’ll pay roughly $28 to $48 per linear foot including materials and labor. The final number moves based on fence height, grade of aluminum, gate count, and whether your existing fence needs demolition and haul-away.
That’s the straight answer. Below, we break down exactly where the money goes so you can price your project before anyone shows up with a clipboard.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s how a typical Fort Worth aluminum fence project lines up, item by item. These are real working numbers from the local market, not national averages stretched to fit Texas.
| Line Item | Cost Range | Notes |
|---|---|---|
| Aluminum panels (residential grade) | $14 – $22 per linear foot | Standard 4 – 5 ft height, powder-coated |
| Aluminum panels (commercial/spec grade) | $22 – $35 per linear foot | Thicker wall extrusions, 6 ft height |
| Posts and post caps | $3 – $6 per linear foot | 2.5″ or 3″ square posts, set in concrete |
| Gates (walk or drive) | $500 – $2,500 each | Drive gates run higher; hardware adds up fast |
| Labor (site prep, digging, concrete, install) | $10 – $16 per linear foot | Includes post holes and concrete setting |
| Old fence removal and haul-off | $2 – $4 per linear foot | Only if you’re replacing an existing fence |
| Permits (if required) | $50 – $250 | Most residential fences in Fort Worth don’t need one, but check your lot |
For a 175-linear-foot backyard with one walk gate, that works out to roughly $6,800 before any grading issues or old-fence removal. Add a double drive gate and you’re closer to $8,500.
The biggest swing factors we see in Fort Worth are gate hardware and terrain. A yard with a steep grade or rocky soil under the grass (plenty of both in the 820 and 817 metros) adds hours to the dig. Post-setting is the slowest part of the job, not the panel hanging.
What Affects Aluminum Fence Installation Pricing in Fort Worth
Every quote is a math problem with a handful of local variables. Here’s what moves the number.
- Linear footage. This is the base multiplier. A 100-foot front-yard enclosure in Mistletoe Heights runs less than a full 250-foot perimeter in Mira Vista, even with identical materials. More feet means more panels, more posts, more holes.
- Fence height. Four-foot panels cost noticeably less than five- or six-foot. If you’re enclosing a pool, Fort Worth code requires a minimum height and self-latching gates, which pushes you into taller, beefier panel grades.
- Aluminum grade. Residential aluminum has thinner wall extrusions than commercial or architectural grade. The cheap stuff carries a 10-year powder coat warranty and feels light in the hand. The good stuff carries 20-plus years and weighs nearly twice as much. Around $8 to $10 per foot separates the two.
- Gate count and type. A single walk gate adds $500 to $900. A double driveway gate adds $1,800 to $2,500 with proper hardware and reinforcement. Gates are where cheap installs fail first, so don’t save your money here.
- Existing fence removal. If there’s an old wood privacy fence or chain-link in the way, budget $2 to $4 per foot to tear it out and haul it off. Fort Worth disposal fees and landfill runs are part of that number.
- Soil and grade. Fort Worth soil runs from sandy loam in parts of the northwest to gumbo clay that turns to concrete in August. Clay and rocky ground mean longer dig times and sometimes a jackhammer attachment. It’s real labor, and it’s billed as such.
Aluminum vs. Other Fence Materials: Cost Per Linear Foot in Fort Worth
Before you commit to aluminum, it helps to see how it stacks against the alternatives. Here are the working numbers we quote in the Fort Worth market.
- Aluminum: $28 – $48 per linear foot installed. Rust-proof, minimal maintenance, 20 to 30 years of service life.
- Vinyl: $22 – $38 per linear foot installed. Lower upfront cost, but Fort Worth heat and UV fade white vinyl faster than manufacturers admit. Also less rigid in high wind.
- Wrought iron (steel): $40 – $65 per linear foot installed. Heavier, stronger, but rusts at every weld point and needs repainting every few years. Labor runs higher because posts are heavier to set.
- Wood (cedar): $18 – $28 per linear foot installed. Cheapest up front, but warps, rots, and needs restaining every two years in the Texas sun. Over 20 years, wood costs more than aluminum.
- Chain-link: $12 – $18 per linear foot installed. Lowest price, least privacy, zero curb appeal.
Aluminum sits in the middle of the pack on day-one cost and wins on total cost of ownership. No rust, no repainting, no rot, no warping. For a Fort Worth homeowner planning to stay put five or more years, the math usually favors aluminum over wood and vinyl.
Permits and Code Requirements in Fort Worth
Most residential aluminum fence projects in Fort Worth do not require a permit if the fence is under 8 feet tall and not enclosing a pool. The city’s development services department handles fence questions, and the rules change if you’re on a corner lot, near an easement, or inside a historic district like Fairmount or Ryan Place.
Pool enclosures are a different story. Fort Worth follows state and local pool barrier codes, which means a minimum 48-inch fence height, self-closing and self-latching gates that open outward, and no more than 4 inches of gap at the bottom. If you’re fencing a pool, tell your contractor up front. It changes panel spec and hardware, and it adds $300 to $700 to the total.
Homeowners associations add another layer. Many HOAs in Fort Worth, especially in planned communities like Walsh, Stillwater, and the neighborhoods around Eagle Mountain Lake, restrict fence height, style, and even color. A metal fence that’s allowed by the city can still get rejected by your HOA design review. Pull the HOA guidelines before you fall in love with a specific panel style.
How to Save on Aluminum Fence Installation
You don’t have to wait for a sale that won’t come. Here are five moves that actually lower the price without lowering the quality.
- Buy panels in standard heights. Four-foot and five-foot aluminum panels are manufactured at volume. Custom heights trigger cut charges and wasted material. If your yard doesn’t need a six-foot privacy look, stay standard.
- Combine projects. If you’re already doing a fence, adding a matching gate or a short interior fence section costs less per foot than doing them as separate jobs later. Mobilization, not material, is what makes small jobs expensive.
- Leave the old fence to the pros. Tempting to save $400 by tearing out the old wood fence yourself. But most homeowners underestimate how much waste a 200-foot fence produces, and a weekend at the Fort Worth landfill with a rented truck eats the savings. Let the installer handle it in one trip.
- Choose mid-grade panels over entry-grade. This sounds counterintuitive, but the cheapest aluminum panels dent easily, fade faster, and look flimsy within two years. Mid-grade costs $4 to $6 more per foot and buys you better powder coat and thicker rails. You’ll replace it later, which means you’ll pay twice.
- Get a written, itemized estimate before you sign anything. A real quote lists footage, panel grade, number of posts, gate hardware, and removal charges. If the estimate is one number on a napkin, you don’t have a quote, you have a guess. We give every Fort Worth homeowner a written price before work starts. You can call (682) 841-6652 and get one free.
Signs You Should Replace Instead of Repair
If you already have an aluminum fence that’s seen better days, here’s when to stop patching and start replacing.
- Rust at the post bases. Good aluminum doesn’t rust. If you’re seeing orange staining where posts meet concrete, the post was set too low or water is pooling at the base. That’s a structural problem, not a cosmetic one.
- Leaning posts after storms. North Texas wind events regularly push posts out of plumb when the concrete footing was undersized. A leaning post can’t be shimmed back straight. It needs a new hole and new concrete.
- Faded or chalky finish. Powder coat breaks down over time, and once the aluminum is exposed to air and UV, oxidation spreads. Repainting aluminum is a temporary fix that usually looks worse than leaving it alone.
- Bent top rails or sagging gates. Gates that drag tell you the hinges and frame are fatigued. New hardware on a tired frame buys you six months.
If you’re pouring meaningful money into an old aluminum fence every year, replacement usually breaks even within three to four years, especially once you factor in the cost of weekly touch-up work.
FAQs – Aluminum Fence Installation Cost
Is aluminum fencing cheaper than wood in Fort Worth?
No. Wood fencing runs $18 to $28 per linear foot installed, while aluminum runs $28 to $48. Aluminum costs more on day one. But over 15 to 20 years, aluminum is cheaper because it doesn’t rot, warp, or need restaining every two years in the Texas heat. The break-even point for most Fort Worth yards comes around year 6 or 7. Call (682) 841-6652 if you want a side-by-side quote for both materials.
How much does a 200-foot aluminum fence cost in Fort Worth?
A 200-linear-foot aluminum fence in Fort Worth typically runs $5,600 to $9,600 installed, including panels, posts, concrete, and one walk gate. The midpoint is around $7,600. Drive gates, grade changes, old-fence removal, and clay-heavy digging all push that number toward the top of the range.
Does a Fort Worth aluminum fence need a permit?
Most residential aluminum fences under 8 feet tall don’t need a city permit in Fort Worth unless you’re enclosing a pool. Pool fences trigger specific barrier code requirements: minimum 48 inches tall, self-latching gates that open outward, and a maximum 4-inch bottom gap. HOAs add their own rules in planned communities, so check your covenant before ordering panels.
How long does aluminum fence installation take?
A standard backyard aluminum fence of 150 to 200 linear feet takes 1 to 3 days for a trained crew, depending on soil conditions and gate count. The digging and concrete setting is the slow part. Panels go up fast once posts are set. We schedule most Fort Worth aluminum fence jobs within one to two weeks of the signed estimate.
Can I install an aluminum fence myself to save money?
You can save about $10 to $16 per linear foot on labor by installing it yourself, but the math falls apart fast. You’ll need a two-person auger for the post holes, a concrete mixer or a lot of bagged mix, a laser level, and a weekend or two with no rain in the forecast. Fort Worth clay soil is hard on rented equipment, and if a post goes in out of plumb, the whole section looks off. A professional crew with the right tools finishes in one to three days what takes most DIYers two full weekends.
Choose Your Installer Carefully
Aluminum fencing is not a product you buy off a shelf and bolt together. The fence lives or dies by what’s under the grass: the depth of the post holes, the quality of the concrete, the plumb of every post. Cut corners below grade and the fence leans after the first serious storm.
That’s why we put the entire project in writing before work starts. You’ll know the exact footage, panel grade, post spacing, gate hardware, and total price. No change orders delivered by surprise. The crew arrives with a live arrival time, you know who’s walking onto your property before they get there, and you get before-and-after photos as the fence goes in.
Luca Romano leads our Fort Worth aluminum fence work. Since 2005, we’ve operated under The Relay Visibility Guarantee: a written price before any work starts, live arrival time tracking, and photo updates throughout the project. It’s the same standard we apply to home remodeling and every other job we take on. Not because it’s a selling point. Because it’s how work should have been done all along.
If you’re researching aluminum fence costs, the next step is a real quote with real numbers. For Aluminum Fence Installation in Fort Worth, we walk your yard, measure the run, and hand you a written price the same day. Call (682) 841-6652 and you’ll get a live person on the line, not a voicemail.
Pricing reflects the Fort Worth market as of 2026. Sawyer Remodel Fort Worth offers free estimates – call (682) 841-6652.
Written by Luca Romano, Owner at Sawyer Remodel Fort Worth, serving Fort Worth since 2005.
What Our Customers Say
"Good renovation. The countertop slipped a week, but I got a text and a new date right away."
- Dina M."Solid job. A few punch list items took a week, but they were done."
- Ike F."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K.
