Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Fort Worth Owner’s Guide
If your ActiveYards driveway or paver system has a failed section, cracked surface, or shifting edge, we stock and install ActiveYards-compatible replacement parts throughout Fort Worth. Most driveway and paver repairs in the Fort Worth market run $250 to $18,000 depending on scope, from a simple re-seal ($250 to $700) to a full paver driveway installation ($7,000 to $18,000). The part you need usually reveals itself through one tell: an uneven edge, a sunken section, or water pooling where it didn’t before.
We’re Sawyer Remodel Fort Worth, and we’re an independent service provider. We’re not affiliated with ActiveYards the manufacturer. What we are is a local Fort Worth crew that has installed, repaired, and replaced ActiveYards-style driveway and paver systems across neighborhoods from Ridglea to Wedgwood and up into the Cultural District. Luca Romano, our owner and lead remodeler, built this company on a simple rule: do the job the way you’d want it done in your own house. That means we’ll tell you honestly whether that cracked paver needs replacing or whether the base under it is the real problem.
Here’s what most Fort Worth homeowners miss about ActiveYards paver systems: the paver itself is rarely the failure point. The base underneath is. North Texas clay soil expands and contracts through our wet springs and dry summers, and that movement is what cracks pavers, shifts edges, and creates low spots. We’ll get into that more below, but know this now: if your pavers are shifting, replacing only the visible piece without fixing the base is a short-term patch, not a repair.
Which ActiveYards Models This Applies To
ActiveYards produces paver and driveway systems across a few product lines, and the compatibility question is simpler than most people expect. Their residential paver systems are designed around modular sizing, meaning a paver from one ActiveYards run generally matches the dimensional grid of another. The gotcha is color match. ActiveYards pavers are manufactured in batches, and a paver bought two years after the original install can be a shade off, even in the same color code. Fort Worth sun and heat also fade pavers over time, which compounds the mismatch. We often source from multiple ActiveYards lots to find the closest match, and we’ll tell you up front if a perfect color match isn’t possible.
To identify your specific part, look for a stamp or mold number on the underside of the paver. Most ActiveYards residential pavers carry a two- or three-digit code that corresponds to the mold shape and size. Take a photo of that code and the paver’s face, and bring it with you. If the stamp is worn or missing, measure the paver’s length, width, and thickness in inches. ActiveYards residential pavers typically run 2-3/8 inches thick for driveway-rated applications, and that thickness matters. Pool-deck and walkway pavers sometimes come thinner, and a thinner paver placed in a driveway will crack under vehicle weight.
On the OEM versus aftermarket question: our experience is that ActiveYards-compatible aftermarket pavers from regional Texas suppliers often match dimensionally but rarely match color perfectly. For a single cracked paver in the middle of a driveway, OEM-matching through a local ActiveYards dealer is usually worth the wait and the freight. For a larger repair or a full replacement, we’ll present both options with real numbers so you can decide based on the actual difference, not a sales pitch.
We also stock parts for other major brands like KraftMaid, Cambria, and Silestone when a project crosses from exterior hardscape into interior work. But this page is about your ActiveYards driveway and pavers, so let’s stay on that.
Styles & brands we work with
Signs Your ActiveYards Driveway & Pavers Is Failing
- Water pooling in new spots. This is the earliest sign of base failure. When the compacted base under your pavers settles unevenly, low spots form and water sits where it used to drain. In Fort Worth’s clay soil, this often starts near downspouts or along the driveway edge where water saturates the ground.
- Edges spreading or separating. Paver driveways rely on edge restraint to hold everything in compression. When that edge restraint fails, the pavers at the perimeter begin drifting outward. You’ll see a widening gap between the driveway edge and the lawn or curb.
- Individual pavers rocking or wobbling. A single paver that moves underfoot means the bedding sand beneath it has washed out or compacted unevenly. In driveways, this is often caused by tire pressure concentrating load on one spot over years of parking in the same position.
- Surface cracks or spalling. Cracks across multiple pavers in a line usually indicate a settling base underneath, not a bad paver. Spalling, where the top surface flakes or pops off, is more common in Fort Worth due to our freeze-thaw cycles in winter combined with de-icing salts if you use them.
- Weeds or ants pushing up between joints. Polymeric sand joints keep pavers interlocked and keep water from eroding the base. When that sand breaks down or washes out, you’ll see weeds, ants, or washout after heavy rain. In Fort Worth, our spring downpours wash out joints faster than most climates.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Worth homeowners, here’s the price picture. Full paver driveway installation runs $7,000 to $18,000 depending on square footage, base condition, and whether you’re doing a fresh install or a full tear-out and replacement. Driveway sealing runs $250 to $700. Concrete driveway installation runs $4,500 to $12,000, and asphalt paving runs $3,500 to $9,000 for comparison. If you’re repairing a section of an existing ActiveYards paver driveway, the cost lands somewhere between sealing and full replacement, and we’ll give you a written line-item price before any work starts.
What drives the range more than anything is what’s under your pavers. If your base is intact and you just have a few cracked pavers, the job is fast and inexpensive. If your base has settled, you’re looking at removing pavers, re-compacting or replacing the base material, re-setting the pavers, and re-sanding the joints. That’s a real repair, not a patch job, and the price reflects it.
Every repair we do includes our written guarantee. If the repair fails within 365 days, you get a second visit at no charge, no argument. That’s the 365-Day Done Right Promise, and it’s in writing on every job we close.
DIY or Call Us?
Paver work isn’t dangerous the way a garage door spring or an electrical panel is. You’re not going to hurt yourself swapping a single paver. But you can hurt your wallet if you do it wrong. The truth is, the paver is the easiest part of the job. The hard part is what’s underneath it: compacting the base correctly, re-establishing the slope for drainage, and locking the edges so the whole system stays rigid. If you skip the base work, your new paver will be cracked or shifted again within a year, and you’ll have spent time and money on a temporary fix.
Call us at (682) 841-6652 and we’ll walk the job with you, look at the base, and tell you honestly whether it’s a weekend project or a crew job. Either way, the estimate is free.
FAQs
A properly installed paver driveway with an intact base can last 25 to 30 years in Fort Worth, but the surface will show wear from our heat and UV exposure long before the structure fails. If your base is failing, expect problems within 5 to 10 years of installation. Call (682) 841-6652 and we’ll tell you which situation you’re in.
A single cracked paver can be replaced in under an hour if the base beneath it is still solid. If multiple pavers in a line are cracked, that’s base settlement, and replacing pavers alone won’t fix the underlying issue. Call (682) 841-6652 for a free assessment.
A single-paver replacement is a same-day job. A section repair with base re-compaction typically takes one to two days. A full driveway replacement runs three to five days depending on the size. We’ll give you a written timeline with your estimate.
We keep common ActiveYards replacement pavers and edge restraints on hand for fast repairs, and we source less common sizes and colors through local Fort Worth ActiveYards distributors. We’ll match your existing paver as closely as physically possible and tell you up front if a perfect match isn’t available.
The work talks. We just back it up.
If your ActiveYards driveway or pavers are failing, don’t wait until a small edge gap becomes a full section rebuild. Call (682) 841-6652 and schedule a free estimate. We’ll come out, look at your base, give you a written price, and tell you exactly what’s going on before a single paver is lifted.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
