Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Fort Worth Owner’s Guide
We stock and install ES Windows-compatible kitchen remodeling components across Fort Worth, with full project work typically running $14,000 to $45,000 depending on scope, window count, and finish level. If your ES Windows units are fogging, binding, or leaking around the frame, we can rebuild the surrounding kitchen structure and replace or re-seat the window units as part of one job. Most owners discover the problem the hard way: a window that won’t close flush against a new backsplash, condensation pooling on the sill, or water staining the drywall under the window after a hard Texas storm.
We’re an independent Fort Worth remodeler, not an ES Windows dealer. We work with your existing units or source compatible replacements where the original has failed beyond repair.
Key Takeaways:
- Full ES Windows kitchen remodel in Fort Worth: $14,000 – $45,000 installed
- We replace or reseat ES Windows units as part of the kitchen scope, not as a standalone window company
- Written price before work starts, guaranteed in writing on every job
- Call (682) 841-6652 for a free estimate
Which ES Windows Models This Applies To
ES Windows manufactures aluminum-frame and thermally broken window lines commonly specified on Texas custom homes and remodels from roughly 2000 forward. The two series we see most often in Fort Worth kitchens are the SE Series (standard aluminum, single-hung and casement) and the TE Series (thermally broken aluminum with dual-pane glass). You’ll find the model code etched on the interior frame edge or stamped on the spacer bar between panes. If the label is faded or painted over, measure the visible glass width and height in inches, then add 3-1/8 inches to each dimension for the rough opening. That rough opening is the number our cabinet and countertop layout has to work around.
On OEM versus aftermarket for ES Windows: the original aluminum extrusions are hard to match after the fact, especially on older SE units where the finish has oxidized to a slightly different tone. When a unit is still structurally sound, we reseal the glass and rebuild the trim and flashing rather than swap the frame. When the frame itself is compromised, we source a same-series replacement or a thermally broken equivalent with matching sightlines. The compatibility gotcha: ES Windows does not share a standardized glass pack with other aluminum window makers, so a “matching” replacement from a different manufacturer will sit visibly proud or shallow in the existing rough opening. If you’ve got one failed unit in a bank of three, that matters.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation between the panes: The dual seal on the insulated glass unit has failed, letting humid air into the air space. Once that seal goes, the argon gas is gone and the window loses its insulating value. This is a glass pack replacement, not a whole-window swap.
- Water staining on drywall below the window: Usually the sill flashing was never lapped correctly over the housewrap, or the weep holes in the frame bottom are clogged with paint and Fort Worth dust. Water tracks inward over time, and the drywall and insulation below go soft before you notice.
- The sash binds or won’t stay open: Aluminum frames flex with the Texas heat and cooldown cycle. After a decade of that, the corner keys loosen and the sash drops out of square. Sometimes it’s a worn balance shoe, sometimes the frame itself has racked.
- Visible corrosion at the corners or along the sill: Salt spray is not your problem in Fort Worth, but sprinkler overspray is. Repeated wetting attacks the aluminum finish, and once pitting starts, the frame is headed toward replacement rather than repair.
- Air movement around the frame on a windy day: The perimeter seal has failed, or the rough opening was oversized from the start. Your kitchen loses conditioned air through a gap you can feel with the back of your hand on a Blue Norther afternoon.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full ES Windows kitchen remodel in Fort Worth runs $14,000 to $45,000. The spread is driven by the size of the window bank, whether you’re replacing cabinets and counters at the same time, and whether the window frames themselves need to be pulled and replaced versus resealed in place. A smaller kitchen with one standard window and basic finishes lands near the bottom of that range. A larger kitchen with a multi-window wall, custom cabinetry, and stone counters climbs fast.
| Scope | Typical Fort Worth Installed Range |
|---|---|
| Kitchen remodel (full, ES Windows reseated or replaced) | $14,000 – $45,000 |
| ES Windows glass pack replacement (insulated unit) | $600 – $1,800 per window, added to scope |
| ES Windows frame replacement (same-size unit, in-kind finish) | $1,200 – $3,500 per window, added to scope |
| Countertop installation (Cambria, Silestone, or Caesarstone) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Cabinet installation (KraftMaid or Wellborn) | $4,000 – $13,000 |
Every ES Windows kitchen remodel from Sawyer Remodel Fort Worth includes a written price before work starts, the 365-Day Done Right Promise in writing, and a line-item parts and labor breakdown. The number you approve is the number on the invoice. No change orders at the door. No surprises when the cabinet boxes come off and we find rotted framing behind the window. We price that in during the estimate walkthrough, not after demo day.
DIY or Call Us?
You can safely gap-test your windows yourself: run a dollar bill around the closed sash and feel for resistance. If it slides freely through, you’ve got a perimeter seal problem worth addressing. You can also check whether the weep holes on the bottom frame are clear, since clogged weeps are the cheapest fix in the book. What you should not do is pull a fixed ES Windows frame out of its rough opening yourself. The units are mechanically fastened through the frame into the king studs, and on exterior walls that’s a structural intrusion you don’t want open during a Texas thunderstorm line. Glass packs weigh 40 to 80 pounds, and a dropped unit takes out the countertop below it. That’s a $3,000 mistake over a $600 part. If you want to know exactly where your window condition falls, call (682) 841-6652 and we’ll walk the kitchen with you. Luca still does the walkthroughs himself.
FAQs
Plan on 15 to 22 years for the frame and 10 to 18 years for the insulated glass unit, depending on sun exposure and sprinkler overspray. South and west-facing kitchens in Fort Worth age faster because the late-afternoon thermal load breaks down sealants faster than anything else. If your windows are past year 18 and you’re remodeling anyway, replacement beats reseal. Call (682) 841-6652 for a straight answer on your units.
Yes, if the frame is sound. We replace the insulated glass unit in the existing frame, rebalance the sash, and reseal the perimeter. If the aluminum shows corrosion or the frame has racked, replacement is the honest call. We don’t charge you for a second opinion: the estimate is free either way.
Count on one to two days per window for glass pack or frame replacement, integrated into the larger kitchen schedule. Where the window work runs in parallel with cabinet and counter installation, it doesn’t add timeline. We confirm the schedule in your written quote before we ever pick up a tool.
We keep common glass pack sizes, balance shoes, and perimeter seal materials on the truck for Fort Worth jobs, but most ES Windows units are order-in because the model and rough opening vary house to house. We tell you exactly what’s coming and when before we start. The work talks. We just back it up.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
