Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Fort Worth Owner’s Guide
If you’ve got a Tremron kitchen that’s showing its age, a full remodel in Fort Worth typically runs $14,000 to $45,000 depending on cabinet work, countertops, and layout changes. We handle Tremron-compatible kitchen remodeling from the first stud inspection to the final walkthrough, and we stock the common materials our crews need so you’re not waiting three weeks on a backsplash sample. Most owners call us after living with a kitchen that fights them for years, cabinets that no longer close square, countertops with burn marks or chips, and layouts that made sense in 2003 but don’t work for how the house actually runs now.
Here’s what nobody tells you about Tremron kitchens: the cabinets were often built with particleboard boxes that hold up fine in dry climates and start swelling the first time a dishwasher leaks in Texas humidity. That’s the moment a “cosmetic refresh” turns into a structural question. We’ve opened more than a few Fort Worth kitchens where the cabinet base under the sink had turned to sponge. That’s not a DIY fix. That’s a pull-it-out-and-rebuild situation, and we quote it honestly before we touch a single door hinge.
Which Tremron Models This Applies To
Tremron kitchens in Fort Worth fall into two rough camps: builder-grade spec installs from the early 2000s and custom-order cabinetry from the mid-2010s. The spec builds used standard 30-inch wall cabinet boxes with 34.5-inch base heights, basic hinge-overlay doors, and laminate counters with a rolled front edge. The custom line moved to 36-inch base cabinets, soft-close undermount slides, and dovetail drawer boxes. Neither is hard to work with, but you need to know which one you have before you order replacement parts or start cutting.
The fastest way to identify what you’re working with: open a drawer and look at the side. If the box is stapled particleboard with a white interior, that’s the builder line. If it’s plywood or has a finished maple interior, that’s custom. When it comes to replacing hardware or refacing, there are solid aftermarket options that match Tremron’s sizes and hole patterns at 30 to 40 percent below OEM pricing. For drawer slides and hinges, we generally use Blum or Salice components because they’re the same brands Tremron sourced from the factory. Buying the OEM label isn’t worth the markup on hardware nobody sees.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Cabinet doors won’t stay closed or hang crooked. This is almost always a hinge problem, not a door problem. Tremron builder-line hinges were press-fit into particleboard, and once the screw holes strip, the door starts sagging. You can shim it for a while, but the frame is telling you it’s done.
- Drawers stick, scrape, or fall off the slides. The nylon wheels on older Tremron slides wear flat on one side. Fort Worth’s summer heat makes the nylon brittle faster than you’d expect, and once a wheel cracks, the drawer starts grinding metal on metal.
- The countertop has chips within an inch of the sink. Laminate and even some thin quartz tops fail at the sink cutout first. Water gets under the edge, the substrate swells, and the surface delaminates. That’s the classic Fort Worth kitchen failure we see in homes near TCU and out toward Benbrook.
- Base cabinets near the dishwasher or sink smell musty or feel soft at the kick plate. This is the particleboard-swelling issue we mentioned earlier. By the time you can smell it or push a screwdriver into the toe kick, the bottom of that cabinet is compromised. It won’t get better.
- You’re working around the layout instead of in it. This one’s not a part failure, but it’s the most common reason we get called. The kitchen still functions, it just doesn’t function for you. Islands in the wrong spot, a sink that faces a wall, no landing space next to the range. Layout problems don’t show up on a punch list, but they cost you time every single day.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a Tremron kitchen remodel lands between $14,000 and $45,000. Here’s what moves the number:
- $14,000 to $25,000: New cabinet doors and drawer fronts, refaced boxes if they’re sound, new hardware, and a mid-range quartz or solid surface counter. Good for kitchens under 200 square feet.
- $25,000 to $35,000: Full cabinet replacement with quality plywood boxes, soft-close everything, upgraded countertops from Cambria or Caesarstone, new sink and faucet, and backsplash. This is where most Fort Worth remodels land.
- $35,000 to $45,000: The full gut: layout changes, island relocation, structural work if you’re opening a wall, premium fixtures from Kohler, custom cabinet lines like KraftMaid, and higher-end stone. Bigger kitchen, bigger number.
Every quote includes the written price before work starts, the materials, the labor, and the haul-away of your old cabinets and counters. No change orders unless you change your mind mid-project, and we put that in writing. The workmanship carries our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Here’s the honest split. You can swap cabinet hardware, touch up paint, replace a faucet cartridge, and even install a new sink if the counter opening matches. Those are homeowner jobs. What you shouldn’t tackle yourself: anything where the cabinet boxes are compromised, any countertop replacement that needs a template, and any gas line work if you’re moving a range. Gas lines are not a homeowner project in Tarrant County. Neither is moving electrical for an island. We pull permits and our work passes inspection, which matters when you sell.
If you’re not sure whether your Tremron kitchen is a repair or a replace, call me. We’ll walk it together and I’ll tell you straight what I’d do in my own house. That’s (682) 841-6652.
FAQs
Most full kitchen remodels take 4 to 8 weeks. Cabinet refacing and countertop swaps run 1 to 3 weeks. The biggest variable is whether we’re doing structural work or moving plumbing, and whether your materials are in stock locally. We give you a written timeline before we start and photo updates as the job progresses, so you always know what’s happening.
Yes, if the cabinet boxes are structurally sound. We inspect every box before recommending refacing versus replacement. If the boxes are particleboard and showing water damage, you’ll spend less in the long run replacing them once than refacing now and rebuilding in three years. Call (682) 841-6652 and we’ll check yours honestly.
We stock hinges, slides, fillers, and common trim pieces that match Tremron’s builder and custom lines. If we need something specific, most parts are two to five business days out through our suppliers. We also install quality aftermarket hardware from Blum and Salice that fits Tremron cabinet dimensions, often at a better price than OEM.
No, not unless you change the scope. The written price we hand you before any work starts is the price on the final invoice. If we open a wall and find something we didn’t expect, we stop, show you photos, explain the options, and get your approval before spending another dollar. No surprises at the door.
A small kitchen update with refacing, new hardware, and a countertop swap runs $9,000 to $20,000. That’s a tight but honest range for Tarrant County. Give us a call at (682) 841-6652 with your kitchen’s rough dimensions and we’ll get you a written quote.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
