Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Fort Worth Owner’s Guide
A full Unilock bathroom remodel in Fort Worth typically runs $9,000 to $28,000 installed, depending on the size of the bath, the tile you choose, and how much plumbing has to move. We stock Unilock pavers and wall block for bathroom applications and can usually start within a week of your quote approval. Most Fort Worth homeowners call us because they’ve spotted cracked grout lines, loose pavers in a shower floor, or water staining creeping up a curb – all signs the original Unilock install has shifted, settled, or was never properly waterproofed underneath.
Unilock makes some of the toughest concrete pavers and wall stone in the business. But a bathroom is a wet, hot, constantly-used space. When a shower pan flexes or a wall block starts wicking moisture, the part doesn’t fail slowly – it fails visibly, and at that point you’re not just looking at cosmetic repair, you’re looking at what’s underneath. That’s where we come in.
Key Takeaways:
- Unilock bathroom remodels in Fort Worth run $9,000 – $28,000 installed.
- We match Unilock model lines by paver thickness, color code, and edge profile; no guessing.
- Failures usually trace back to the waterproofing layer, not the paver itself.
- We carry OEM Unilock stock plus proven aftermarket equivalents in Fort Worth; written price before we start.
Which Unilock Models This Applies To
Unilock’s bathroom-adjacent lines break down into three buckets. First, the townstone and wall block series (Townstone, Pisa, and Brussels Wall) used for shower curbs, accent walls, and tub aprons. Second, the U-Cara modular panel system, which some Fort Worth builders spec for feature walls. Third, the Elegance, Umbriano, and Beacon Hill flagstone lines, which show up on bathroom floors where the homeowner wanted a stone look without the maintenance of natural stone.
The compatibility gotcha with Unilock is thickness. Most bathroom floor pavers run 2-3/8″ to 3-1/8″ thick, and a lot of owners buy a “matching” paver online only to find it’s a 1-1/2″ patio slab that doesn’t match the existing floor height. Check the stamped code on the underside of a loose paver or look for a color code like “Sierra” or “Limestone” on your original invoice. If you can’t find it, bring us a photo and we’ll ID it from the mold profile.
On OEM versus aftermarket: Unilock color blending is better than most, so for visible surfaces we prefer OEM. For a shower pan base that gets covered by tile and waterproofing, a quality aftermarket concrete paver – same thickness, same PSI rating (Unilock runs 8,000-10,000 PSI on most lines) – works fine and can trim the material line item by 15-20%.
Styles & brands we work with
Signs Your Unilock Bathroom Remodeling Is Failing
- Crumbling grout joints in a paver floor. Pavers expand and contract with Fort Worth’s summer heat and winter cold snaps. When they’re laid too tight, the pavers push against each other and shear the grout out. The paver isn’t the problem; the installation is.
- A paver that sounds hollow underfoot. You tap it and get a thock, not a thud. That means the mortar bed beneath has delaminated, usually from a waterborne crack. Water got in, the bed broke down, and now that paver is floating on nothing.
- White efflorescence blooming on wall block. Water is moving through the block and carrying minerals to the surface. This isn’t a stain you scrub off once. It’s a sign the wall wasn’t properly sealed or the weep system is blocked.
- Musty smell that won’t go away. Unilock is dense, but the gaps and the backing material aren’t. A persistent mildew smell in a bathroom with Unilock means water is sitting somewhere it shouldn’t – behind a wall block or under a shower floor. That’s a waterproofing failure, not a cleaning problem.
- Sagging or cracked shower curb. In Fort Worth homes, we see a lot of curbs fail because the original builder used untreated wood as the curb core under the paver face. The curb looks fine for five years, then the wood swells, the pavers split, and the whole assembly has to be rebuilt.
Replacement Cost & What’s Included
A partial Unilock bathroom repair in Fort Worth – replacing a failed shower pan floor, rebuilding a curb, or re-setting wall block – lands between $3,000 and $8,500. A full Unilock bathroom remodel runs $9,000 to $28,000, and the spread comes from a few variables: bathroom square footage, whether you’re moving plumbing, the tier of fixture you choose, and whether we’re pulling up an existing concrete slab or working over a wood subfloor.
| Scope | Fort Worth Price Range | What’s Included |
|---|---|---|
| Shower floor paver replacement (curb, pan base, waterproofing) | $3,000 – $8,500 | Demo, new sloped bed, waterproofing, pavers, grout, seal |
| Unilock wall block re-set (shower or tub apron) | $1,200 – $4,000 | Remove, repair backing, re-install block, grout, seal |
| Full Unilock bathroom remodel | $9,000 – $28,000 | Demo, plumbing, waterproofing, all tile/paver work, fixtures, trim-out |
You get a written line-item price before we touch a tool. The number on that page is the number you pay unless you add scope yourself. Every Unilock job we do carries our 365-Day Done Right Promise: if something isn’t right in that first year, we come back and make it right. No invoice, no argument.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can watch for trouble yourself – tap pavers for hollow spots, check grout lines seasonally, keep an eye on the caulk joint where your shower floor meets the wall. That’s smart ownership, and it helps us catch problems early when you call.
But pulling Unilock pavers out of a shower floor is not a weekend project. The paver is the visible layer; underneath is the waterproofing membrane, the sloped mortar bed, the weep system, and the drain assembly. Break the membrane because you pried wrong, and you’ve turned a $3,000 repair into a $9,000 subfloor replacement. One wrong swing with a chisel near a curb and you’re into the framing. This is one of the few things where we’ll tell you directly: don’t. We’re already in Fort Worth, our truck already has the blades, the mortar, the sealers. Call (682) 841-6652 and let us look at it.
The work talks. We just back it up.
FAQs
A properly installed Unilock bathroom floor should give you 20 to 30 years before the pavers themselves wear out. The limiting factor in Fort Worth isn’t the paver, it’s the waterproofing assembly underneath, which typically needs attention at the 10 to 15 year mark. We see failures earlier when the original installer skipped a membrane or sloped the bed wrong, and later when everything was done right. Call (682) 841-6652 and we’ll tell you which camp your bathroom falls in – the estimate is free.
It depends on where the crack is and how deep it runs. A hairline crack in one floor paver that’s still fully bonded can sometimes be epoxy-stabilized and sealed. A crack that runs through a shower curb or a wall block with movement behind it cannot be patched – it has to come out and get rebuilt. We’ll always price the repair honestly, and if patching is a waste of your money, we’ll tell you that outright.
A partial repair (shower floor, curb, or wall block) takes our crew one to two days on site, plus 24 to 48 hours of cure time before water hits it. A full Unilock bathroom remodel in Fort Worth runs three to four weeks depending on plumbing relocations, crawlspace work, and custom glass/panel lead times. You get a schedule in writing before we start, with photo updates along the way.
We keep common Unilock colors and profiles on our truck for repairs – Limestone, Sierra, and the 3-1/8″ Elegance line for bathroom floors – and special-order non-stock colors through our material partners, usually with a 5 to 10 day lead. If you have a partial Unilock bathroom you’re matching to, call (682) 841-6652 with a photo and we’ll confirm the color match before you commit.
Ready to Fix the Unilock Bathroom for Good?
If you’ve got a Unilock bathroom in Fort Worth that’s cracking, hollowing, or holding water, don’t wait for the subfloor to rot. We’ll look at it, tell you exactly what failed, and hand you a written price before anything starts. Luca Romano still does the walkthroughs himself because he’s seen what happens when the owner stops showing up. We’re Sawyer Remodel Fort Worth – independent, not affiliated with Unilock, but we know their product lines better than most builders in Tarrant County. Call (682) 841-6652 to schedule your free estimate.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
