Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Fort Worth Owner’s Guide
We stock and install Unilock-compatible driveway and paver systems in Fort Worth, with full paver driveway installation typically running $7,000 to $18,000 depending on square footage, base condition, and pattern complexity. Most homeowners discover they need help after a section of pavers sinks, shifts, or separates, and the fix usually comes down to the base, not the paver itself. Here’s the thing: Unilock pavers are concrete units built to last decades. What fails in Fort Worth is almost always what’s underneath them or how they were laid in the first place.
Which Unilock Models This Applies To
We work with the full Unilock paver line you’ll actually find on Fort Worth driveways: the Brussels Block and Courtstone for traditional looks, Beacon Hill and Bristol Valley for older installs, and the larger-format Richcliff and Umbriano pavers that have become common on newer builds throughout the city. The compatibility gotcha here is thickness. Driveway pavers come in 60mm and 80mm profiles, and the 80mm units are required for vehicle traffic. We’ve seen pavers pulled from patios and reused on driveways, and they crack under the first pickup truck that rolls over them. If you can measure the edge of a pulled paver with a tape, that’s your first clue about whether your driveway was even built right.
OEM Unilock units come from their three Texas plants, and if a specific color is discontinued, matching takes skill. We’ll source exact Unilock replacements where they’re available, and when they’re not, we carry approved aftermarket equivalents that match the size and color closely enough to blend. Sawyer Remodel Fort Worth is an independent service provider, not affiliated with Unilock. That independence means we’ll tell you when a color-matched aftermarket paver makes more sense than paying freight to chase a discontinued batch.
Styles & brands we work with
Signs Your Unilock Driveway & Pavers Is Failing
- Sunken depressions where you park. This is base failure. The compacted layer under the pavers has eroded or was never thick enough. Fort Worth’s clay-heavy soil expands and contracts, and without a proper base, your pavers sink in the wet season and don’t come back.
- Shifting or spreading along the edges. Missing or failing edge restraint. If the outside border isn’t locked in place, the whole pattern walks outward under load. We see this most often on driveways that were installed without concrete edge restraints.
- Pavers cracking along tire lines. Wrong paver thickness. 60mm patio pavers used on driveways will fail this way, usually within the first two or three Texas summers.
- Gaps between pavers growing. Joint sand has washed out. Once the sand goes, the pavers rub against each other and chip. Fort Worth’s downpours and our freeze-thaw cycles speed this up.
- Standing water or drainage pooling. The slope wasn’t set right, or the base has shifted enough to trap water. Water pooling at the garage apron is the one that causes the most long-term damage, including foundation issues you do not want.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full paver driveway installation in Fort Worth runs $7,000 to $18,000. A partial repair where we pull a section, rebuild the base, and relay the pavers can run $1,500 to $4,000 depending on how far the damage spread. What drives the range: the size of the area, how deep the base problem goes, paver thickness, pattern complexity, and whether your existing pavers can be reused. Some jobs need only new sand and relaying. Some need a full dig-out, new base, and new pavers because the old ones are the wrong unit for vehicle traffic.
Every quote is a written price, itemized, before any work starts. You see the paver cost, the base cost, the labor, and the disposal line. If we find something unexpected when we dig, you get a call and a revised number before we proceed, never after. The work carries the Sawyer 365-Day Done Right Promise: if the repair fails in the first year, we make it right without charging you again. Luca Romano still walks every driveway repair himself before the crew rolls out.
DIY or Call Us?
There are a few things you can safely do to diagnose the problem. Snap a photo of the failing area from a few angles. Measure the paver thickness at an edge. Check whether the damaged area is near a downspout or sprinkler head, because water is the usual culprit. You can pull a single paver in a failing area and look at what’s underneath: if it’s sitting on sand over dirt with no compacted base, that’s your answer.
Where DIY goes wrong is digging out a large section, rebuilding the base, and relaying the pattern. If you don’t compact in lifts, set the edge restraint, and re-establish the right slope, the repair fails inside a year and you’ve spent weekends doing hard labor twice. Pavers are heavy. Compacted base work is a back-breaker. We’re not guessing. We’ve rebuilt dozens of DIY driveway fixes in Fort Worth that failed faster than the original problem. Call (682) 841-6652 and we’ll set up a free estimate. Luca will look at it himself.
FAQs
The pavers themselves can last 30 to 50 years. What usually fails first is the base underneath them, and in Fort Worth’s clay soil with our wet-dry cycles, an improperly built base can fail in as little as 5 to 7 years. If the base is right and the drainage is handled, the pavers outlast most of the house. Call (682) 841-6652 for an exact condition assessment, estimates are free.
Sections of a Unilock driveway can usually be repaired by pulling the damaged area, rebuilding the base, and relaying the pavers, assuming the pavers themselves are the correct thickness and not cracked through. If the pavers are 60mm units that were never rated for vehicle traffic, or if the base failure runs across the whole driveway, a full replacement is the honest call. We’ll tell you which one you’re looking at before you spend anything.
A partial repair in Fort Worth typically takes 1 to 2 days. A full paver driveway installation runs 3 to 5 days depending on the size and how much old material has to come out. You’ll get a written schedule with your estimate, and live arrival times each morning through The Relay Visibility Guarantee.
We keep common Unilock Brussels Block, Courtstone, and Richcliff pavers in the colors we see most across Fort Worth on hand or within a day from local suppliers. Discontinued colors or specialty lines may take longer to source, and we’ll tell you that at the estimate, not after you’ve committed. Call (682) 841-6652 and we’ll check stock while you’re on the phone.
If your driveway is shifting, sinking, or cracking, don’t wait until the damage spreads to the garage apron. Call (682) 841-6652 to schedule your free estimate. Sawyer Remodel Fort Worth sends a written price before any work starts, background-checked and uniformed technicians to your door, and a full year of accountability after the last paver is set. The work talks. We just back it up.
Written by Luca Romano, Owner & Lead Remodeler, Sawyer Remodel Fort Worth at Sawyer Remodel Fort Worth, serving Fort Worth and nearby areas.
