Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Unilock Construction
Unilock service in Fort Worth is what we do, plain and simple. We’re an independent Unilock service provider, not a dealer or a manufacturer-authorized shop, which means we fix what’s actually broken instead of pointing you toward a full teardown when a repair makes more sense. Our crew works on Unilock Brussels Block, Umbriano, Town Hall, and Rivercrest Wall systems across Fort Worth, and we’ve learned how this city’s expansive clay and hard water beat up pavers in ways you won’t see in Dallas or Arlington. If your Unilock patio, driveway, or retaining wall is shifting, hazing over, or losing joint sand, call (682) 841-6652 and we’ll tell you straight what it’ll take to fix it.
What makes our Unilock work different comes down to two things. First, we put the price in writing before a single paver gets pulled up. Second, we know Fort Worth soil, not just Unilock products. That combination matters more than most homeowners realize until their driveway starts heaving near the garage.
Why Trust Sawyer Remodel Fort Worth for Your Unilock Construction?
Unilock pavers are engineered to hold up, but the base underneath them isn’t. Fort Worth’s expansive clay soils shrink during hot, dry summers and swell after sudden downpours. That movement travels straight up through the bedding layer and into your pavers, which is why we see Brussels Block driveways heaving near the garage approach and Umbriano patios pulling apart at the edges. A crew that’s only installed Unilock product on paper doesn’t know that. We do, because Luca Romano, Owner & Lead Remodeler at Sawyer Remodel Fort Worth, learned the trade hands-on at Los Angeles Trade-Technical College and has spent two decades swinging hammers on everything from tract homes to custom builds. He’s seen enough demo days go sideways to know the difference between a product failure and a base failure, and he still does walkthroughs himself. The work talks. We just back it up.
Every Unilock job we take on runs under The Relay Standard: a live arrival time, photo updates before and after, and a written price before any work starts. You’ll know exactly who’s walking onto your property because our technicians are background-checked and uniformed. And our 365-Day Done Right Promise covers the work for a full year after we close the job. If it’s not done right, we make it right.
Styles & brands we work with
Common Unilock Construction Problems We Fix in Fort Worth
Here’s what we actually see on Unilock jobs around Fort Worth, and why these failures happen here more than in neighboring cities.
- Paver shifting and heaving from expansive clay soils. Fort Worth sits on some of the highest shrink-swell soil in the metroplex. When summer hits and the ground dries out, clay contracts and leaves voids under your pavers. When rain returns, the clay swells and pushes everything upward. Brussels Block driveways are especially prone to heaving near the garage approach because that’s where the subgrade transition is steepest. We fix it by pulling the affected area, recompacting the base with proper aggregate, and reinstalling with fresh bedding sand and edge restraints.
- Efflorescence and surface staining from hard water and irrigation overspray. Fort Worth’s municipal water is hard, full of calcium and magnesium. When irrigation heads drift and start misting your Unilock patio every morning, those minerals dry on the paver surface and leave a white haze called efflorescence. It’s not a manufacturing defect. It’s chemistry. We remove it with the right cleaner at the right dilution, then we adjust the irrigation to stop the cycle from repeating. On Umbriano pavers, which have a tighter surface, we’ll often follow up with a breathable sealer to keep the minerals from re-bonding.
- Edge restraints failing on driveways and patios. The edge restraint is the unsung hero of any paver installation. In Fort Worth, where soil moves seasonally, a plastic snap edge driven into loose soil doesn’t hold. We regularly see patios where the border row has drifted outward by an inch or more because the restraint was undersized or never properly staked. Our fix is concrete edge restraint or a deeper spike pattern, depending on the application.
- Joint sand erosion and weed growth in high-traffic areas. Joint sand locks pavers together and keeps them from shifting. When it washes out or gets blown away, weeds move in and the whole system loosens. This is common on Unilock Town Hall walkways and driveways where the pitch isn’t steep enough to shed water quickly. We sweep out the old sand, reapply a polymeric sand rated for Fort Worth’s UV and heat, and wet-cure it so it sets like mortar without the rigidity.
- Retaining wall lean or bulge on Rivercrest Wall systems. Rivercrest walls look great until the drainage behind them fails. Fort Worth’s sudden downpours fill the backfill with water, and hydrostatic pressure starts pushing the wall forward. You’ll see a gradual lean or a bulge mid-wall. We excavate the backfill, replace it with clean drainage stone, install or repair the drain tile, and reset the courses. If the wall units themselves are cracked or spalled, we source genuine Unilock replacement units to match the existing face texture and color.
Unilock Parts & Our Repair-vs-Replace Approach
When matching existing Unilock pavers is critical, we use genuine Unilock replacement units. Color and texture matching on Brussels Block or Umbriano is unforgiving, and an aftermarket paver that’s 3% off in color will announce itself from the street. We’d rather source the real thing.
But jointing sands and sealers are a different story. Several aftermarket polymeric sands outperform OEM options in Fort Worth’s heat and UV exposure, and we stock the ones we’ve tested through multiple summers. Same goes for sealers. We’ll recommend what actually holds up, not what’s got the best margins.
Our rule on repair versus replace is simple. Localized damage like a cracked paver, a failed edge restraint, or eroded joint sand is a repair. Full replacement only makes sense when the base has failed, meaning the subgrade wasn’t compacted properly in the first place and the whole system is moving. We’ll tell you which one you have, and we don’t sell a full teardown when a weekend repair fixes the problem. Call (682) 841-6652 if you’re not sure which camp your project falls into.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We start by listening, then we look. You’ll walk us around the area, show us where the pavers moved or the haze appeared, and we’ll walk the whole surface, checking for base compaction, edge restraint failure, drainage patterns, and joint sand condition. For Unilock specifically, we’re looking at how the product is sitting on the Fort Worth subgrade, not just what’s visible on top.
- 2
Repair or Install. We pull only what needs pulling. If the base is sound and it’s a paver-level fix, we’re surgical about it. If the base failed, we excavate to the proper depth, recompact with the right aggregate in lifts, and rebuild the system so it stays flat through the next drought cycle and the next downpour after that.
- 3
Test. We plate-compact the finished surface where appropriate, sweep in the joint sand, wet-cure it, and then we walk the whole area with you. You’ll see the finished job before we call it done, and you’ll have before-and-after photos in the project record.
- 4
Warranty. Every Unilock job we do is covered by our 365-Day Done Right Promise. If something shifts or the surface doesn’t hold up within a year of the work, we come back and make it right. No argument, no invoice.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Fort Worth
We service and install Unilock Brussels Block, the workhorse paver you’ll see on driveways all over Fort Worth’s Fairmount and Wedgwood neighborhoods. We work on Umbriano, the smooth-faced paver that shows stains more readily, which is why we’re particular about sealing it correctly. Town Hall and Rivercrest Wall round out the lines we carry locally for replacements. We keep a rotating stock of common units on hand for repair work, which means we’re not waiting on a freight shipment to fix your patio. If you’re planning a new installation, we’ll help you choose the line and color that holds up best against Fort Worth’s clay and hard water, not just the one that photographs best in a catalog.
We Also Service These Brands
Unilock is a big part of what we do, but it’s not the only brand we work with, and our General Contractor services cover far more than pavers. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your project spans more than one trade, you don’t need to juggle five contractors. One crew, one written price, one guarantee.
FAQs – Unilock Construction Service in Fort Worth
Why do Unilock pavers shift in Fort Worth more than in other cities?
Fort Worth’s expansive clay soil is the culprit. The metroplex has some of the highest shrink-swell potential in Texas, especially on the west side where neighborhoods sit on the Eagle Ford shale formation. When the soil dries out in summer, it contracts and creates voids under your pavers. When rain returns, it swells and pushes them upward. Dallas and Arlington have their own soil issues, but the clay composition in Fort Worth moves more aggressively than what you’d see with Unilock Construction in Watauga, TX or points east. The fix is a properly compacted base with the right aggregate depth, not just more sand. Call (682) 841-6652 and we’ll assess what’s actually moving under your pavers.
Can you match Unilock Brussels Block pavers when repairing a section of my driveway?
Yes. Brussels Block has been in production long enough that we can source genuine Unilock units to match your existing driveway. The trick is matching both color and age. New pavers will look brighter than the rest of the surface for a season or two, so we’ll pull units from a less visible area and blend the new ones in where they’ll weather naturally. We’ll show you the match before we install. For an exact quote on your repair, call (682) 841-6652.
What causes white haze on my Unilock patio, and can you remove it?
That white haze is efflorescence, and in Fort Worth it’s usually caused by hard water from irrigation overspray. Fort Worth water carries calcium and magnesium, and when it dries on the paver surface, those minerals bond and create a chalky film. It’s not a product defect. We remove it with a pH-appropriate cleaner and then adjust your irrigation so the heads aren’t misting the patio every morning. On Umbriano pavers, we’ll often apply a breathable sealer to keep minerals from re-bonding. If you’re seeing haze on your patio, call (682) 841-6652 and we’ll tell you what’s causing it.
How do you repair a Unilock retaining wall that is leaning or bulging?
A leaning or bulging Rivercrest Wall is almost always a drainage problem. Water builds up behind the wall after a Fort Worth downpour, and the hydrostatic pressure pushes the wall forward. We excavate the backfill, replace it with clean drainage stone, check the drain tile, and reset the courses. If individual wall units are cracked, we source genuine Unilock replacements to match the face texture. This is not a DIY fix. The wall is holding back soil, and getting it wrong means redoing the whole thing. Call (682) 841-6652 for a written estimate.
Is it better to repair or replace a Unilock driveway with widespread joint sand loss?
Repair is usually the answer. Widespread joint sand loss doesn’t mean the pavers failed. It means the sand washed out or blew away, and the pavers lost their interlock. We sweep out the old sand, reapply a polymeric sand rated for Fort Worth’s heat, and wet-cure it. The pavers lock back together and the surface is stable again. Full replacement only makes sense if the base underneath has failed, which you’ll see as broad heaving or sinking, not just empty joints. For a straight answer on which one you’ve got, call (682) 841-6652 and we’ll come look.
How much does Unilock construction cost in Fort Worth?
Unilock paver projects in Fort Worth range widely depending on the scope. Here’s what you’re looking at:
| Project | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
Those numbers account for Fort Worth’s soil conditions, which usually means a deeper base than you’d need in a sandier market. Every quote we give is written, line-itemed, and locked before work starts. Call (682) 841-6652 for an exact number on your project. Estimates are free.
Book Your Unilock Service in Fort Worth, TX
If your Unilock pavers are shifting, hazing, or losing joint sand, let’s get it looked at. Call Sawyer Remodel Fort Worth at (682) 841-6652 for a free estimate. We’ll put the price in writing before any work starts, and we’ll back the fix with our 365-Day Done Right Promise.
Written by Luca Romano, Owner & Lead Remodeler at Sawyer Remodel Fort Worth, serving Fort Worth since 2005.
